You don't see many of these

suzublu · 16th May 2017, 13:10

At the bottom of your street

willshot · 16th May 2017, 13:40

Are they going to drill for oil or gas in British West Hartlepool, Ronnie ?

stevestrat · 16th May 2017, 14:24

These phone masts are getting out of hand.

Rikki · 16th May 2017, 14:42

Loads of them about, only the other week spotted one very similar, on quite a large ship moored just off the Gare at Saltburn ,getting cross decked onto a barge

Its a shame that Teesside is getting a reputation for the place to dismantle these when once we would have been building them.. I suspect the only place capable of still building them on the Tees would be Herema's

monty1 · 16th May 2017, 14:45

Quote:

Originally Posted by Rikki

Loads of them about, only the other week spotted one very similar, on quite a large ship moored just off the Gare at Saltburn ,getting cross decked onto a barge

this is the one you seen mate, its in for decomisioning

Rikki · 16th May 2017, 14:47

Monty1, I knew that

Was just being my usual awkward self

the last topside load out on the Tees I can remember was probably 15-20 years ago out of Herema's . after that Tees only seemed to get the Jackets out of the Old Lin Din yard or where Ables are now . The Topside work went to Wallsend, Lowestoft or Nigg bay - or that was just the load outs I was on.

Its a crying shame seeing as how many heavy lift wharves we have on the Tees, some that could still be recommissioned. especially lower down the River. Ideal use for the old Coke Wharf at Redcar thats far enough down that it wouldn't require constant dredging, got plenty of room and far better transport links than those further upstream

suzublu · 16th May 2017, 14:55

Quote:

Originally Posted by Rikki

Loads of them about, only the other week spotted one very similar, on quite a large ship moored just off the Gare at Saltburn ,getting cross decked onto a barge

Its a shame that Teesside is getting a reputation for the place to dismantle these when once we would have been building them.. I suspect the only place capable of still building them on the Tees would be Herema's

Watched it coming in

http://www.the75andztclub.co.uk/foru...=266389&page=2

jackatesme · 16th May 2017, 15:09

Extreme Plenum Rodding.

16th May 2017, 13:10	#1
suzublu This is my second home rover 75 1.8 vvc club se wedgwood blue Join Date: Aug 2009 Location: Seaton Carew Posts: 26,922 Thanks: 65 Thanked 7,142 Times in 4,642 Posts	You don't see many of these At the bottom of your street

16th May 2017, 14:24	#3
stevestrat This is my second home ZT260 #243 (resting) Join Date: May 2010 Location: Prestonpans Posts: 22,487 Thanks: 650 Thanked 4,624 Times in 3,358 Posts	These phone masts are getting out of hand. __________________ Steve T4 Location Map

16th May 2017, 14:42	#4
Rikki Loves to post MG ZT+ 190, Land Rover Series IIA, KIA Pro C'eed VR7 Join Date: Apr 2017 Location: Redcar Posts: 258 Thanks: 151 Thanked 158 Times in 53 Posts	Loads of them about, only the other week spotted one very similar, on quite a large ship moored just off the Gare at Saltburn ,getting cross decked onto a barge Its a shame that Teesside is getting a reputation for the place to dismantle these when once we would have been building them.. I suspect the only place capable of still building them on the Tees would be Herema's __________________ [SIGPIC][/SIGPIC] *GREYSCALE* Born Monday, 14th July 2003 @ 12:51:51 9,940th ZT to run off the production line, out of 18,894 2,948th ZT 190 + to be made out of 4,023 1,042nd ZT in XPower Grey (code: LEF) to be made out of 3,143 XPower Grey ZTs Done: Cam belt and aux belts. Water pump, pulleys and tensioners, Hunter wheel alignment, New thermostat and housing, Plenum guard mod, refix undertray, Bonnet cable mod, upgraded Balance VIS motor, One empty bank account, one nervous breakdown. Last edited by Rikki; 16th May 2017 at 14:45..

16th May 2017, 14:47	#6
Rikki Loves to post MG ZT+ 190, Land Rover Series IIA, KIA Pro C'eed VR7 Join Date: Apr 2017 Location: Redcar Posts: 258 Thanks: 151 Thanked 158 Times in 53 Posts	Monty1, I knew that Was just being my usual awkward self the last topside load out on the Tees I can remember was probably 15-20 years ago out of Herema's . after that Tees only seemed to get the Jackets out of the Old Lin Din yard or where Ables are now . The Topside work went to Wallsend, Lowestoft or Nigg bay - or that was just the load outs I was on. Its a crying shame seeing as how many heavy lift wharves we have on the Tees, some that could still be recommissioned. especially lower down the River. Ideal use for the old Coke Wharf at Redcar thats far enough down that it wouldn't require constant dredging, got plenty of room and far better transport links than those further upstream __________________ [SIGPIC][/SIGPIC] *GREYSCALE* Born Monday, 14th July 2003 @ 12:51:51 9,940th ZT to run off the production line, out of 18,894 2,948th ZT 190 + to be made out of 4,023 1,042nd ZT in XPower Grey (code: LEF) to be made out of 3,143 XPower Grey ZTs Done: Cam belt and aux belts. Water pump, pulleys and tensioners, Hunter wheel alignment, New thermostat and housing, Plenum guard mod, refix undertray, Bonnet cable mod, upgraded Balance VIS motor, One empty bank account, one nervous breakdown. Last edited by Rikki; 16th May 2017 at 14:57..

16th May 2017, 15:09	#8
jackatesme This is my second home rover 75 saloon.Renault Captur 1.5 diesel. Join Date: Mar 2013 Location: rhymney Posts: 3,661 Thanks: 2,269 Thanked 1,242 Times in 702 Posts	Extreme Plenum Rodding. __________________ - John B signing out Maralyn was born 9th Sept 2004 14.44.48. 103,597 of 112,381 (75s) 3,021 of 4,744 Connie SE 239 of 1.685 Platinum Gold. "Maralyn": Platinum Blonde,Troublesome,Unpredictable.

16th May 2017, 13:40	#2
willshot Posted a thing or two Ex-ZI190 owner. ,Ford Focus RS Join Date: Nov 2006 Location: Malton Posts: 1,573 Thanks: 1,123 Thanked 301 Times in 198 Posts	Are they going to drill for oil or gas in British West Hartlepool, Ronnie ?