|
||
|
29th September 2013, 20:09 | #1 |
Gets stuck in
mg zt-t+ 2.5 v6 177 bhp Join Date: Jan 2013
Location: Back in yam yam land... West Bromwich!
Posts: 824
Thanks: 413
Thanked 61 Times in 52 Posts
|
wiring harness
i currently have the kenwodd krc 591 cd/ tape player , all hard wired to the steering wheel controls. i want to change it over to a different make and model for extra oooomph lol. any ideas? dont wanna start swapping and changing wires over and wanna keep the steering wheel controls. all help is greatly appreciated as always
|
29th September 2013, 20:33 | #2 |
This is my second home
75 Join Date: Nov 2006
Location: Leeds
Posts: 8,432
Thanks: 176
Thanked 907 Times in 716 Posts
|
There aren't many headunits that would fit straight in without any alteration to the wiring.
There are two Kenwood units. The KDC-5021 A 50 watt per channel single slot CD radio tuner The KDC-M6021 G A 50 watt per channel single slot CD radio tuner with MP3 CD playback. They are both of the same age as your present Kenwood unit and would have limited availability. The latest headunits will require a interface unit to enable the steering wheel controls to work. Dave T |
29th September 2013, 20:45 | #3 |
I really should get out more.......
Now Other Manufacturer Join Date: Nov 2006
Location: Co. Kerry
Posts: 2,786
Thanks: 16
Thanked 310 Times in 283 Posts
|
The ZT with a Kenwood unit normally has infra-red steering wheel controls.
If it is hard wired, it depends how your current stereo steering wheel cables are connected, if it is via an Autoleads PC99 adapter lead (or a similar lead by another manufacturer), all you would need is a patch lead for the make of stereo you get. If you got another Kenwood unit, it should just be a straight one-for-one swap. Last edited by raykay; 29th September 2013 at 23:36.. |
|
|