|
||
|
29th August 2017, 17:58 | #7181 |
Avid contributor
Vauxhall Zafira Auto Join Date: Sep 2016
Location: Chester le street
Posts: 227
Thanks: 165
Thanked 30 Times in 26 Posts
|
Front disc back plate
Nice cool day so couple hours fitting new backing plates.Didnt have much trouble getting the old ones off they were paper thin.
__________________
Rover 75 2.0 CDTI(131Ps) Conn Saloon Starlight Silver MBB, This vehicle was the 5,318th 75 CDT Connoisseur (135) to be made out of 8,746. Completed, Pcv filter,viton rings,rear,springs,discs,pads,shoes & shocks.Plenum guard,alternator.Headlamp refurb.rear exhaust.all filters alternator & belts,o/s control arm,windows /mirror controls sorted.2 door cards realigned.rear bulb holder, Wipers,Revotec fan condenser,silicon hoses.Lower rear engine mount Tony |
30th August 2017, 09:24 | #7182 |
Posted a thing or two
MG ZT-T Join Date: May 2010
Location: Edinburgh
Posts: 1,667
Thanks: 992
Thanked 384 Times in 277 Posts
|
Finished the polishing of the headlamps. Using Solvol metal polish, clean cloths and a bit of elbow grease. It really takes the staining and scratches out of the glass and brings them back to 'new'.
__________________
MG ZT-T 180+Sports Auto Date of Birth: 21 May 2002
|
30th August 2017, 10:10 | #7183 |
Posted a thing or two
Rover 75 Tourer Join Date: May 2017
Location: Hull
Posts: 1,848
Thanks: 216
Thanked 432 Times in 340 Posts
|
Looked at mine thinking, MOT soon and ask myself - when are you going to deal with the paintwork, feel really lazy these days or just old age
|
30th August 2017, 11:40 | #7184 |
Posted a thing or two
Rover 75 Tourer Join Date: May 2017
Location: Hull
Posts: 1,848
Thanks: 216
Thanked 432 Times in 340 Posts
|
The paint can wait and no sharp edges to worry about..me thinks a few bushes have play, felt a bit like we had rear wheel steering this morning..
|
30th August 2017, 11:40 | #7185 |
Posted a thing or two
Rover 75 Connie Mk2 1.8 (Mo) Join Date: Feb 2017
Location: Sheffield
Posts: 1,531
Thanks: 875
Thanked 335 Times in 289 Posts
|
Took Mo for a test drive round the block. Top pipe to radiator very hot but the heater is blowing cold air
Still got some work to do.
__________________
Mo was born Tuesday, 22nd June 2004 @ 08:32:41 This vehicle was the 99,307th 75 to run off the production line, out of 112,381 This vehicle was the 5,377th 75 1.8 Connoisseur to be made out of 6,033 This vehicle was the 783rd 75 in Firefrost Red (code: CEV) to be made out of 2,089 Firefrost Red 75s |
1st September 2017, 17:58 | #7186 |
MG ZT Join Date: Jan 2011
Location: Newcastle Upon Tyne
Posts: 20,151
Thanks: 3,565
Thanked 10,837 Times in 5,718 Posts
|
Started a late pre MOT check on Frosty, wheels off, brakes checked, and all looking good.
The headlights which I had given a quick once over last year were once again looking a little sad, so I decided to pop the bumper off and remove them for some corrective surgery. So as I had recently unearthed my long lost machine polisher, I decided to had a practice on an old headlight first....... Before....... After...... However as Sods law dictates, a phone call from a customer interrupted working on your own car for a change, and then a few more calls fielded then the heavens opened So after a bit of a delay, I lobbed it all back together, should be ok for the upcoming test Brian |
1st September 2017, 18:15 | #7187 |
Gets stuck in
MG ZT-T Join Date: Feb 2017
Location: St Albans
Posts: 855
Thanks: 69
Thanked 236 Times in 172 Posts
|
Deep cleaned and waxed my ZT-T roof. I'm still coming to grips with the size of the thing...could land a plane up there.
Found a few scratches and chips ( I guess from loading straps) to deal with but not too bad. Tomorrow out with the old toothbrushes to clean the gap under the roof rails and the rail mountings themselves. Then some back-to-black on the rails to keep them nice.
__________________
• This vehicle was the 8,186th ZT-T to run off the production line, out of 8,249 • This vehicle was the 1,723rd ZT-T 190 + to be made out of 1,756 • This vehicle was the 149th ZT-T in Mica Blue (Ignition) (code: JGY) to be made out of 160 Mica Blue (Ignition) ZT-Ts |
2nd September 2017, 14:08 | #7188 |
Loves to post
Rover 75 Saloon CDTi Join Date: Aug 2012
Location: Mansfield
Posts: 287
Thanks: 18
Thanked 69 Times in 52 Posts
|
New rear spring today. Easy with the technique of releasing the roll bar at both ends. 3 hours start to finish and that included cleaning both arches, rubbing down the spring seat and rust treating it and having the caliper off to adjust the handbrake. Productive couple of hours.
|
2nd September 2017, 14:11 | #7189 |
Posted a thing or two
Rover 75 Connie Mk2 1.8 (Mo) Join Date: Feb 2017
Location: Sheffield
Posts: 1,531
Thanks: 875
Thanked 335 Times in 289 Posts
|
Took a trip up to Andy Willi's. Finally got the lower engine mount and exhaust hanger replaced on Kim.
Next job, a bite to eat then out to continue bleeding Mo's coolant system
__________________
Mo was born Tuesday, 22nd June 2004 @ 08:32:41 This vehicle was the 99,307th 75 to run off the production line, out of 112,381 This vehicle was the 5,377th 75 1.8 Connoisseur to be made out of 6,033 This vehicle was the 783rd 75 in Firefrost Red (code: CEV) to be made out of 2,089 Firefrost Red 75s |
2nd September 2017, 19:09 | #7190 |
Newbie
MG ZT Join Date: May 2015
Location: Doncaster
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
|
Today I did....
Today I repaired the heater blower and the high speed radiator fan. The transistor pack, had gone faulty.swapped for a new one, but forgot the link cable, which arrived today, as this connects the wiring loom to the changed connector on the new transistor pack.
In doing so the A/C is now working properly and the rad fan is going to high speed. Nice to have a demister again....now summer is over. |
Thread Tools | |
Display Modes | |
|
|