|
||
|
||
|
![]() |
#1 |
Moderator
MG-ZTT Join Date: Mar 2007
Location: Ware, Herts
Posts: 19,798
Thanks: 161
Thanked 1,249 Times in 1,036 Posts
|
![]() I'm after an n/s outer holder, and a member has kindly offered me one but it's the o/s outer one.
Now I'm pretty sure Rover wouldn't make the 4 holders different without good reason and when you add the colour combinations, I reckon there's probably 80 odd combinations. Can I swap them round or will it up set the sensors operation ?
__________________
David Impecunity is the mother of ingenuity Useful how to's for common problems Car Of The Month Jan 2014 [SatNav Power Down] [Coolant Level] [SatNav Repair] [Diesel Non Starting] [Paint Codes] [Rear Light Seals] [Reversing Light Switch] [Bleeding Brakes][Sunroof Drain] [Early ZT's][Instrument Pack Diagnostics][ATC Diagnostics] |
![]() |
![]() |
![]() |
#2 |
*
Rover 75 FaceLift Tourer CDTi 170BHP Auto ConnSE 2005 Model Starlight Silver Join Date: Nov 2006
Location: Abergele
Posts: 28,735
Thanks: 0
Thanked 6 Times in 5 Posts
|
![]() I'm afraid the Sensor Holders are listed as Four Seperate Items on EPC and there is over 100 Listed in Total without complete Kits!
Inner Sensor Holder R/H Outer Sensor Holder R/H Inner Sensor Holder L/H Outer Sensor Holder L/H Then listed in Loads of Colours! Not cheap either, £25 + VAT for each Holder and Tranduser costs £41 + VAT each. Complete kit £153.49 + VAT. May be worth keeping an eye on EBay. Last edited by JohnDotCom; 13th June 2007 at 00:29.. |
![]() |
![]() |
![]() |
|
|