Installing Electric seats

[Dominic22]

I have just bought some alcantara electric none memory seats to replace my heated manual alcantara seats in the ZT. When I have come to plug them in there is a couple of things I am not sure about.

The drivers side I have 4 plugs 3 corresponde with the seats, Blue, Large Black, Yellow. There is a smaller black connector that I don't seem to have a connector on the seat for.

There is also a small connector at the back that I think it for heated seats. On the old seats it pluged into another on the seat, this seems not to have any other connector.
Sorry for the terrible photos... Picture 1 shows the connectors on the seat, Picture 2 shows the smaller black connector that I cannot see where is connects. Picture 2 shows the smaller connector that I am not sure where the other end is... Hope that makes some sense
http://i1121.photobucket.com/albums/l501/dominic2210/22072012062.jpghttp://i1121.photobucket.com/albums/l501/dominic2210/22072012060.jpghttp://i1121.photobucket.com/albums/l501/dominic2210/22072012061.jpg

[Steve916]

I'm interested in following this thread Dom, as I have just purchased some electric seats to replace my heated manual seats:}

[Richard Garner]

Exactly the same on both of mine. I think the spare plug is for the seat belt warning light on the ipk. It was only available on a handful of export models, ones destined for Japan I believe.

[Dominic22]

This is a picture of the old seat. I seem to be missing these on the new seats. The black connector in picture 1 & the second half of the yellow connector in picture 2
http://i1121.photobucket.com/albums/l501/dominic2210/22072012067.jpghttp://i1121.photobucket.com/albums/l501/dominic2210/22072012066.jpg

[MN190]

The black connector is for the seatbelt warning sensor.
If you have this on your old drivers seat then you can you swap the seatbelt holders over

[Dominic22]

Any idea what the yellow connector in the last picture of my first post. The old seats there is connector for it to go into but these seats there does not seem to be one

New seat last photo first post
Old seat last photo of my second post

[MN190]

The picture in post 2 of this may help

http://www.the75andztclub.co.uk/forum/showthread.php?t=58214