PDA

View Full Version : Radio Key Code


Whitecairns
24th October 2012, 11:13
I've never had the key code for the radio in my 75. This has never been a problem until now when I've had extensive work done on the engine and the battery has been disconnected for days on end. Is there any way I can get the code?

Thanks for your help.

Martin

eurorover
24th October 2012, 12:33
http://www.the75andztclub.co.uk/forum/showthread.php?t=127063

SKS Disco
24th October 2012, 14:00
I've never had the key code for the radio in my 75. This has never been a problem until now when I've had extensive work done on the engine and the battery has been disconnected for days on end. Is there any way I can get the code?

Thanks for your help.

Martin

Hi,
Furrows of Telford can get the code for you for a small charge.

Furrows Telford
Furrows Telford
Haybridge Road
Telford
Shropshire TF1 2FF

Phone:01952 642500

eurorover
24th October 2012, 22:57
my radio code service is on line and same day!!!

chrissyboy
25th October 2012, 07:06
whip the radio out as sometimes the four diget code has been written on the casing.

ukmastiff
25th October 2012, 07:35
Is no one going to suggest he joins the club, it certainly would avoid him paying 25 pounds for a radio code !

Mas

chipsceola
25th October 2012, 07:40
Out of date, Xpart02 club offer IIRC is temporarily suspended.
Chips

Arctic
25th October 2012, 21:24
whip the radio out as sometimes the four diget code has been written on the casing.

As below but can they not sometimes have a six digit code :shrug:

Whitecairns
26th October 2012, 14:45
whip the radio out as sometimes the four diget code has been written on the casing.

In order to get it out, I need the appropriate tool ... but what tool do I need? The one advertised widely on Ebay (where there ate two holes either side of the radio) doesn't seem appropriate for my radio. See picture.

http://i21.photobucket.com/albums/b264/Whitecairns/rover-radio.jpg

eurorover
26th October 2012, 17:07
remove the top eyebrow by taking the two screws out after removing the plactic cap underbeath it. then take out the two screws holding the top of the radio. remove ATC and pull radio. If it is the origional radio then i can do it of chassies number