PDA

View Full Version : Criuse Control

SapperGB
26th October 2012, 16:42
ever since my clutch was changed my cruise hasnt worked. Any ideas where i should begin to look?

I suspect there is a pedal switch somewhere because before the clutch change it would sometimes be intermittent, requiring me to poke around at the back of my pedals to get it to activate.

I had clutch/slave/master changed a few months ago.
rover54
26th October 2012, 16:49
You have two switches, one for the clutch and one for the brake peddle. They just need to be moved towards the peddles so they are touching.
SapperGB
26th October 2012, 17:34
Cheers Ed,

I shall take a look tomorrow, could anything else have been disturbed by the garage?
Mike Noc
26th October 2012, 19:58
Cheers Ed,

I shall take a look tomorrow, could anything else have been disturbed by the garage?

As Ed says one of the switches, and most likely the one on top of the clutch pedal. Difficult to see it but run your hand up there and you can feel the switch at the top. Just push it back down and it should click into place.

Mike
COLVERT
26th October 2012, 20:16
They are proximity switches so you will find no moving parts. ;)