Fuel return 'T' repair.

[yamahajrb]

:)This is how I repaired the fuel return 'T' piece, (see photo below), small brass tube, drill out broken part until brass tube is a tight fit, I superglued it in, make sure you dont push tube in too far as this will block one of the other holes & make sure all holes are clear of superglue, this was on the car for several days but I did replace with the proper one, I'm sure this would have lasted indefinately, cheers John:D



http://i1279.photobucket.com/albums/y535/yamahajrb/T003_zpse4720c39.jpg