PDA

View Full Version : Removal / fitting of plastic / wood fascia


Zeb
11th December 2006, 15:17
Is there a how-to for this hidden away somewhere? I want to take out the plastic one and fit the wood one but the Haynes manual is not very clear in its instructions or pictures!

Keith
11th December 2006, 16:02
What all of it?

Instrument side pulls up from the bottom, air bag cover has two plastic clips at the bottom to release using a flat blade left eyeball is a bit fiddly though but might be easier once air bag cover is removed pull it out and down

Did you know to replace the passenger air bag requires the entire dashboard fascia to be removed that is a lot of work so don't set the air bag off :)

Zeb
11th December 2006, 18:15
What all of it?

Instrument side pulls up from the bottom, air bag cover has two plastic clips at the bottom to release using a flat blade left eyeball is a bit fiddly though but might be easier once air bag cover is removed pull it out and down

Did you know to replace the passenger air bag requires the entire dashboard fascia to be removed that is a lot of work so don't set the air bag off :)


Yup, all of it...thanks for the start!