Discount MG Rover Spares comes to the 75 and ZT Owners Club! Hello and welcome.

[DMGRS]

Well, I've done it! I'm now a full trader on here.

I'm Mat and I own Discount MG Rover Spares - www.dmgrs.co.uk.
I try to be as competitive as I can on all parts, however my primary focus is on quality. I only buy parts I either know through experience to be good, or have seen fitted to other vehicles and have proven solid in testing.

So far I've had nearly 500 orders in under 6 months of trading, with no major issues or quality problems. I'm proud of my reputation, and will actively go out of my way to resolve a problem / help you choose the right part / assist with returns etc.

Some parts may be a little more expensive than eBay etc, but as they say - you pays your money and takes your chances. I'm always an email away, have a great returns policy (I pay for all faulty returns as I legally have to, and don't quibble regarding refunds) and only supply top notch kit.

Items of note:
SNR Strut Top Mount bearings (Set of 2) - Only £29.99 inc P+P.
http://www.dmgrs.co.uk/collections/steering-components/products/rover-75-mg-zt-strut-top-bearings-rnr100090-oem

Rover 75 / MG ZT CDTi Crankcase (PCV) Filter (Premium Brand) - Only £13.99 inc P+P.
http://www.dmgrs.co.uk/collections/air-filters/products/rover-75-mg-zt-cdti-pcv-filter-kit-llj500010

Rover 75 / MG ZT Pollen Filter (Premium Brand) - Only £13.99 inc P+P.
http://www.dmgrs.co.uk/products/rover-75-mg-zt-pollen-cabin-filter-oem-jkr000030

Rover 75 / MG ZT Premium Clutch Kit, including Borg & Beck Slave Cylinder - From £169.99 inc P+P.
http://www.dmgrs.co.uk/collections/clutch-transmission-parts/products/borg-beck-oem-rover-75-cdti-mg-zt-cdti-clutch-kit-with-slave-3pc-rp1069-uub105301

Rover 75 / MG ZT CDTi Servicing Kit - £28.99 inc P+P.
http://www.dmgrs.co.uk/products/rover-75-cdti-mg-zt-cdti-service-kit-fuel-air-and-oil-filter

Rover 75 / MG ZT 1.8 / 1.8T Cambelt Kit Inc Waterpump and Tensioner - £59.99 inc P+P.
http://www.dmgrs.co.uk/products/k-series-timing-belt-cambelt-kit-inc-water-pump-99-on-auto-tensioner

Loads more stuff in there too - search 'Rover 75' to see it all.

Enjoy chaps! Any questions, drop me a line on here.

[andyg2011]

Super idea Matt

And welcome to blue :D

[Mark2000cc]

Well done matt, looks brilliant.. Look forward to doing business with you :-)

[DMGRS]

Cheers guys!

As popularity grows I'll be looking for business mail and supplier accounts, and with such things comes discount - which will be passed straight back to you guys!

I'm hopeful - I have a large following on 'the other side' and hope I can gain the same following here.

If there's enough interest, I'd gladly pack the Tourer with parts and head to a meet or 10... :)

[DMGRS]

Shall we have a 'first week only' discount code to get some orders, and you can feedback on your experience? :D

[Godfer]

Best of luck! This could prove a most rewarding symbiosis! Free Shipping alongside (promised) top Customer Service could be a killer USP!!!!

[Mark2000cc]

Shall we have a 'first week only' discount code to get some orders, and you can feedback on your experience? :D

What about a first order discount as not everyone will need something this week... Me included! :o:D

[DMGRS]

Thank you, I try my best! :D

First 10 orders can have 10% off by using the code '75ZT10' on checkout.

:group:

[DMGRS]

What about a first order discount as not everyone will need something this week... Me included! :o:D

I'm sure I can sort something out. :D

[Mark2000cc]

I'm sure I can sort something out. :D

Good man... Well up for that! :bowdown:

[mick160]

Thank you, I try my best! :D

First 10 orders can have 10% off by using the code '75ZT10' on checkout.

:group:

Thanks, just successfully used the discount code :D.

[rich17865]

great news! With all these people turning into traders, it is making me want to sell something so I can join in :D

[andyg2011]

great news! With all these people turning into traders, it is making me want to sell something so I can join in :D

you did 3/4 weeks ago :getmecoat::getmecoat:

[MG Tom]

Great stuff Mat, nice to see it working out for you :)

[DaveyC]

Great stuff. I like that we have increasing choice and your website is very good with clear prices (unlike some others).

Just one question, what make are the MAFs for the diesel that you are selling?

All the best,

Dave :D

[GED75]

hi matty,nice to see you on the forum full time:}

ive used matty in the past for service items ,clutch ,slave etc,and can vouch for the excellent service offered [hand delivered clutch from burnley to bolton] :bowdown:because i was in a fix,
i also believe in keeping the money within the rover community and not big multinationals
good luck with your venture mathew:}

[DMGRS]

great news! With all these people turning into traders, it is making me want to sell something so I can join in :D
Jump in! I'll see you again soon at the Hollow Tree, however not in the next couple of weeks to other commitments.

Great stuff Mat, nice to see it working out for you :)
Cheers Tom, it seems to be working out well. Good to be a part of the community. :cool:

Great stuff. I like that we have increasing choice and your website is very good with clear prices (unlike some others).

Just one question, what make are the MAFs for the diesel that you are selling?

All the best,

Dave :D
Cheers for the feedback.
The MAFs are usually Intermotor parts - I've had good success with their aftermarket MAFs on the 75/ZT and currently have one fitted to my own ZT-T with good results.

hi matty,nice to see you on the forum full time:}

ive used matty in the past for service items ,clutch ,slave etc,and can vouch for the excellent service offered [hand delivered clutch from burnley to bolton] :bowdown:because i was in a fix,
i also believe in keeping the money within the rover community and not big multinationals
good luck with your venture mathew:}

Ah Ged! Great to see you on here.
Was lovely chatting to you, I'm sure I'll see you again soon! Is your lovely 75 up and running now? How is the clutch? :)

[carlalou]

Hi Matty,

Could you tell me, is this the correct fuel filter for my 2.5 v6 190 please?

http://www.dmgrs.co.uk/collections/fuel-filters/products/rover-k-series-all-fuel-filter-wjn101191-wjn101190-200-400-25-45-zr-zs

Thankyou very much :)

[MG Tom]

It's not correct Carla. Yours is an in tank filter, technically it should last the life of the car.

[carlalou]

It's not correct Carla. Yours is an in tank filter, technically it should last the life of the car.

Thanks Tom

Technically it should yes :D

However on my typhoon, i had to get it replaced.

The fuel coming out of it was black? so she had a new one put in with one of those orange clips as she broke down on me?

I just want to get one for Kermit, then that will be one thing that she cannot brake down on me with :D

[DMGRS]

The joy of the 75/ZT petrol fuel filters strikes again! :D
Unfortunately it's not something I carry in stock, as they're very rarely called upon for replacement.

8x 10% off codes left people - use code '75ZT10' on checkout.

[Le Mans 190]

Good to see another trader on board :D

[DMGRS]

Thank you! :D

A good read for anyone wondering a bit more about myself and the Shop:
http://www.the75andztclub.co.uk/forum/showthread.php?p=1423914

:)

[carlalou]

Thanks Matty,

Order placed :bowdown:

It was only for 6 spark plugs...... but it's a start :o:getmecoat::D

[BlueTrophy]

Stupid question - where do I put the discount code?

[carlalou]

Stupid question - where do I put the discount code?

It took me ages to find out, but then im having one of those days :o

after you come back from the paypal screen it will put you back to your order to confirm, then the there is a box to put it in there.

then confirm order :)

[GED75]

Jump in! I'll see you again soon at the Hollow Tree, however not in the next couple of weeks to other commitments.


Cheers Tom, it seems to be working out well. Good to be a part of the community. :cool:


Cheers for the feedback.
The MAFs are usually Intermotor parts - I've had good success with their aftermarket MAFs on the 75/ZT and currently have one fitted to my own ZT-T with good results.



Ah Ged! Great to see you on here.
Was lovely chatting to you, I'm sure I'll see you again soon! Is your lovely 75 up and running now? How is the clutch? :)hi matt yeh car finally done [i hope]http://www.the75andztclub.co.uk/forum/showthread.php?t=159051

and the clutch,its like treading on a feather pillow :}

[DMGRS]

hi matt yeh car finally done [i hope]http://www.the75andztclub.co.uk/forum/showthread.php?t=159051

and the clutch,its like treading on a feather pillow :}

Good stuff! You managed to get one of the last kits before my supplier put their prices up slightly, glad it's all working well.

For anyone else's reference, the kit purchased was this one:
http://www.dmgrs.co.uk/collections/clutch-transmission-parts/products/borg-beck-oem-rover-75-cdti-mg-zt-cdti-clutch-kit-with-slave-3pc-rp1069-uub105301
(The Borg and Beck Clutch and Slave, £189.99)

[MG Tom]

Good stuff! You managed to get one of the last kits before my supplier put their prices up slightly, glad it's all working well.

For anyone else's reference, the kit purchased was this one:
http://www.dmgrs.co.uk/collections/clutch-transmission-parts/products/borg-beck-oem-rover-75-cdti-mg-zt-cdti-clutch-kit-with-slave-3pc-rp1069-uub105301
(The Borg and Beck Clutch and Slave, £189.99)

Your site says £169.99 mate :)

[GED75]

Your site says £169.99 mate :)169 for the budget kit 189 for the premium kit:}

[DMGRS]

Your site says £169.99 mate :)

As kindly spotted by Ged, I do a kit with either a 'budget' clutch, or a premium Borg & Beck item.

The reasoning behind this is that it's the Slave that usually results in failure - the 'budget' clutches are still perfectly fine and have performed admirably in the past when I've seen them fitted.

Some people prefer brands, and that's why I also offer the £189.99 kit with the 'Premium' Borg and Beck clutch.

[DMGRS]

Cheers for the orders so far guys! 5 discount codes left for 10% off - by using the code '75ZT10' on checkout.
Get your 75/ZT serviced in time for winter at a ludicrously low price... :)

:clap:

[championdaddy]

Do you have Crank or Cam sensors for the diesel ???

[DMGRS]

I do have a couple of spares if you need one :)

£20 inc P+P will get you a known good one.

[championdaddy]

I do have a couple of spares if you need one :)

£20 inc P+P will get you a known good one.

So.....£40 for a pair of sensors ????? So long as they definately work......yes please Bert !!!!!

[DMGRS]

So.....£40 for a pair of sensors ????? So long as they definately work......yes please Bert !!!!!

I'll go and check I have one of each... 2 secs! :D

[DMGRS]

Found them! I'll drop you a PM.

[DMGRS]

5 discount codes left - also adding some more CDTi products this evening. :)

[DMGRS]

Just a quick update - as noted in my Signature and on the Shop website I'll be away for a few days. Any orders placed will be delayed until my return, however you are still of course more than welcome to place orders for any bits you do need.

Thanks for your support thus far - it's been great being a part of the community.

[DMGRS]

Right, now away from the PC until the mid/end of next week. All orders will be processed as usual and sent on my return - my good lady will make sure everything is ordered in waiting for when I get back.

Turrah for now. :)

[DMGRS]

Another update - I've got a few bits recently added:
OEM Coolant Caps - cheaper than any other OEM item for sale @ £11.99 inc P+P:
http://www.dmgrs.co.uk/collections/thermostats-and-waterpumps/products/rover-75-mg-zt-coolant-cap-oem-esr1480-fits-all-petrol-diesel

Coolant Cap O Rings - £2.99 per pair:
http://www.dmgrs.co.uk/collections/thermostats-and-waterpumps/products/rover-75-mg-zt-coolant-cap-o-rings-viton-to-fix-esr1480

Undertray Bolt and Fixing sets from £2.49:
http://www.dmgrs.co.uk/collections/bolts-and-fixings/products/rover-75-mg-zt-undertray-fixing-kit-10x-bolts-and-clips-kzm000050-kzm000050

Thank you for your support so far chaps!

[3pinplug]

Hi

Just to say my first dealing with Mat has been excellant, after the courier cocked up delivery he perservered and got the item to me in time which enabled me to put my car in for the work as planned. He even had a full replacement on standby, so good old fashioned service values something which is quite rare today, highly recommended and will definitely be using Mat again.

Mark

[DMGRS]

Hi

Just to say my first dealing with Mat has been excellant, after the courier cocked up delivery he perservered and got the item to me in time which enabled me to put my car in for the work as planned. He even had a full replacement on standby, so good old fashioned service values something which is quite rare today, highly recommended and will definitely be using Mat again.

Mark

Thank you Mark! :)
Glad I could help out.

[thundercat]

Yep, I have just signed up as this is going to save me cash, as an example, the air filter for my CDTI from Halfords is £17.50, as I live 22 miles (44 round trip) I would have to add a further £5 on top of the filter cost for fuel. That's the only drawback from living out in the sticks. I can accept having to wait a day or two for parts to arrive. :wine:

[Graham1961]

Will defo be doing buisness with you.

[DMGRS]

Yep, I have just signed up as this is going to save me cash, as an example, the air filter for my CDTI from Halfords is £17.50, as I live 22 miles (44 round trip) I would have to add a further £5 on top of the filter cost for fuel. That's the only drawback from living out in the sticks. I can accept having to wait a day or two for parts to arrive. :wine:

Good news, I've just dropped the price of CDTi air filters and service kits this morning - down to £13.99 inc P+P now. Service kits start at £29.99 inc oil filter, fuel filter and air filter.
Thank you for your support. :D

Will defo be doing buisness with you.
Thank you, good to know. :D

[DMGRS]

I'm cutting a few prices down thanks to new suppliers, so you should see a marked decrease in items like service kits, head gasket kits etc.

I don't stock any 'cheap' parts, only bits I have used and know to be good quality, so on most items I won't be cheaper than a budget item from eBay... however I'll get as close as I can while supplying quality parts. None of us want to do a job twice... :)

[DMGRS]

Now added - a handy addition for all owners.

Tyre dust caps: http://www.dmgrs.co.uk/collections/accessories/products/tyre-dust-caps-set-of-4

[DMGRS]

Just a quick update - I've added a service kit for the V6 after some careful product selection. :)

Here it is:
http://www.dmgrs.co.uk/collections/servicing-kits/products/rover-75-mg-zt-service-kit-v6

Thanks again for your support guys. :)

[Greeners]

Order placed

Your Order ID is: #1649

Thanks

[lovema75]

Undertray kit and cap o-rings ordered!:drool4:

[DMGRS]

Undertray kit and cap o-rings ordered!:drool4:

Thank you - the O rings will be arriving with me on Monday for sending Tuesday. I only had a few in as samples - I've just ordered a larger amount. :)

[DMGRS]

Quick one chaps - here's a link to our Opening Times over Christmas and New Year.

http://www.the75andztclub.co.uk/forum/showthread.php?p=1515219#post1515219

[DMGRS]

Now added - quality ABS sensors (front and back) to put an end to cheap eBay items, and £80+ for an OEM item. :)

Front: http://www.dmgrs.co.uk/collections/brake-discs-and-pads/products/rover-75-mg-zt-front-abs-sensor-ssb000150
Rear: http://www.dmgrs.co.uk/collections/brake-discs-and-pads/products/rover-75-mg-zt-rear-abs-sensor-ssb000160

[myrover2013]

Great when do you go into production with the new 2014 rover 75, now that would make my Christmas.

welcome

[bward01]

Hi Matt
I am in desperate need of a front ABS sensor urgently,as my car is due a taxi plate next week. Would it be possible to pick one up personally this week, as I only live in Kirkby?

Thanks

Brian

[DMGRS]

Hi Brian,

Unfortunately I'm awaiting stock of those at the moment - they're due in on Tuesday.

My apologies,
Mat

[Jay]

Hi Matt.

I am looking for a diesel tail pipe finisher as in this picture.
[/URL][URL=http://s1096.photobucket.com/user/jay560/media/warning/tail%20pipe/tailpipefinisher_zps14e22383.png.html]http://i1096.photobucket.com/albums/g329/jay560/warning/tail%20pipe/tailpipefinisher_zps14e22383.png (http://s1096.photobucket.com/user/jay560/media/tailpipefinisher_zps04a5161b.png.html)


Thank You

Jason:}

[DMGRS]

Hello Jason, unfortunately I don't have any similar to that in stock - my apologies. eBay is usually pretty good for finishers, I've had some from there many years ago. :)

[Bigcul1]

Hi Matt

Just ordered a Diesel Clutch kit and Tazu from you. Thanks for the easy ordering process. Look forward to receiving it.

Andrew

[DMGRS]

Hi Matt

Just ordered a Diesel Clutch kit and Tazu from you. Thanks for the easy ordering process. Look forward to receiving it.

Andrew

Thanks for your order - it should be out to you early next week. :)

[Ratty]

Hi Mat Nice easy ordering system.
just ordered an oil filter + sump plug

Good system,Thanks.

[DMGRS]

No problem at all - thank you for your order. :)

[brickie501]

Just ordered an undertray fastener kit - yay, Land Rover bits for my MG! - & a complete service kit - the pollen filter will go 'on the shelf' but I need a fuel filter soon as I have one of an incorrect batch of Mann filters apparently (fitted with multiple O-rings) :eek:

[JEK]

Just ordered Fuel, oil and pollen filter for the ZT-T.
Pricing looks good as does the quality of the parts.
All topped off with free delivery.

Cannot ask for more !!

Thanks DMRS. You are now bookmarked on my system for future needs.

[MGMalc]

Hi Mat, Just ordered strut bearings, nice an easy. Thanks.:}

[DMGRS]

Thanks all for your orders - your ongoing custom is very much appreciated.
I put a lot of the money received back into future projects to ensure the future viability of running our cars - in a few years I'll likely be having quite a few hard-to-find parts made up.
I keep a close eye on parts that are NLA, and will work to minimise any unavailability of essential parts.

[billybumble]

Received this morning many thanks Matt, great service:D

[DMGRS]

Received this morning many thanks Matt, great service:D

No problem - thanks for your order. :)

[Elick]

Battery box lid received this morning, thanks very much, good price too!

Russ

[Trevor1975]

Thanks Matt for helping us to keep our 75/ZTs going :bowdown:

The one part that is worrying me is the rear trailing arm camber adjustment bolts (6 per car) - these are all rounding off etc and a proper replacement kit would be a good idea, I think they need to be grade 10.8 high tensile...

TIA

[boogiedrummer]

Hello, I just want to thank Mat for excellent service and a quick delivery time.
Very satisified and happy to be able to order brand new parts for my precisous :-)

[DMGRS]

Thanks for the excellent feedback - it's always appreciated.