Part number please

[EastPete]

Hi

Does anyone know the part number for the coolant hose with the bleed screw in it, that goes in front of the battery/FBH bracket (on a CDTi without the FBH). Mine has been patched up with tape, and I would like to renew it next time I change the coolant, but I cannot spot it on any of the diagrams on the Rimmers website.

Thanks for any information part number or possible source/supplier.

Cheers

Pete

[pm77]

PCH119334 listed as no 11 here http://www.rimmerbros.co.uk/Item--i-GRID001590

Post edited thanks to mss

[EastPete]

Thanks Paul

Are you 100 per cent certain this is the right number ? - I could not see the bleed screw in the drawing, and I found one of these hoses with that part number on e-bay, and it also did not appear to have a bleed screw in it (although the photo was not great). Apologies for coming back and questioning this, but I do not want to waste time/money getting the wrong hose.

Thanks for your help

Pete

[MSS]

The correct part is no 11 in the Rimmer's schematic. PCH119334

You still have to look hard for the bleed screw but it is just visible in the picture.

[pm77]

Sorry, your correct. My mistake. The bleed screw is hiding in the bottom left of the picture.