PDA

View Full Version : FBH (fuel burning heater)

Kennyeth
22nd July 2015, 06:48
When the PCB (printed circuit board) fails on the FBH, which part is it on there that has failed and what`s the way to fix it?
I know you can post it off to France, but I would like to have any info if possible.
Ken.
HarryM1BYT
22nd July 2015, 07:06
When the PCB (printed circuit board) fails on the FBH, which part is it on there that has failed and what`s the way to fix it?
I know you can post it off to France, but I would like to have any info if possible.
Ken.

If you look up my posts on the subject and those of FrenchMike, there is a link below. The usual component failures are identified.

FrenchMike doesn't charge much for the work involved and you get back a working and fully tested PCB.
Kennyeth
22nd July 2015, 07:32
If you look up my posts on the subject and those of FrenchMike, there is a link below. The usual component failures are identified.

FrenchMike doesn't charge much for the work involved and you get back a working and fully tested PCB.

Thanks Harry, Mike has been in touch and I decided that it would be easier and safer for him to check out my PCB`s.
Ken.