PDA

View Full Version : rover 75


frosty
22nd September 2015, 16:22
failed mot on air bag light help

roverbarmy
22nd September 2015, 16:24
Most probably the wiring connections under the driver's seat. Do a search for the "how to".

stevestrat
22nd September 2015, 17:17
Most probably the wiring connections under the driver's seat. Do a search for the "how to".Connectors are present under BOTH front seats. You are looking for the yellow (airbag) and blue (seat belt pretensioner) connectors. Disconnect, squirt with WD40, reconnect and disconnect several times then a blob of vaseline before finally reconnecting. If that doesn't cure it there are several other possibilities and I'd recommend a T4 session to take away the frustration of trying to identify the cause.

By the way, how did you manage to post your question three times?

frosty
22nd September 2015, 18:05
just lucky

frosty
22nd September 2015, 18:06
thanks will try that tomoz got my fingers crossed

KWIL
22nd September 2015, 18:12
Vaseline (or rather petroleum jelly in its unbranded form) is not entirely anti moisture. I used to test samples to ensure that a batch could be used as an insulator.:mad:

ballymenaman
22nd September 2015, 19:35
Had the same problem. Tried umpteen times to clean up contacts on the connectors under the seats, but the issue kept coming back. I did away with the connectors by soldering the wires together. Only an issue if you ever need to remove the seats, which is unlikely! Remember to disconnect the battery if you're doing the job and don't allow the cut wires to touch in case it sets off the airbags (I might be wrong about this but , hey, why take any risks?).

t5tart
22nd September 2015, 19:40
do not solder the wires together ... use these (http://www.ebay.co.uk/itm/Superseal-Electrical-Connector-Kits-1-2-3-4-5-6-Way-Waterproof-12-24v-/331473546461?var=&hash=item4d2d5cecdd)

they are also waterproof which eliminates the problem

marinabrian
22nd September 2015, 19:45
From an old electrical engineering theory textbook of mine ;)

Petrolatum.
Petrolatum (trade name Vaseline) is perhaps the first- used joint compound.
It aids in preventing oxidation and aids in excluding moisture in copper and plated copper connections.

NO-OX-ID.
This grade "A special" is a petroleum base compound with
higher melting point, higher oxidation resistance, and better weathering characteristics than petrolatum.

However not many people will have NO-OX-ID in their bathroom cabinet, unlike Vaseline ;)

Brian :D

t5tart
22nd September 2015, 22:59
http://www.the75andztclub.co.uk/forum/showpost.php?p=2051821&postcount=34

marinabrian
23rd September 2015, 14:49
http://www.the75andztclub.co.uk/forum/showpost.php?p=2051821&postcount=34

Nice, but completely unnecessary ;)

Brian :D

t5tart
23rd September 2015, 17:09
:flushed:Nice, but completely unnecessary ;)

Brian :D

hehe not if you havent done your sunroof drains or rear light seals :flushed:

(MODS we really need a drowning smiley or one in a snorkel and fins lol)

stevestrat
23rd September 2015, 17:11
http://www.buddy-icons.info/img/smile/1609.gif

t5tart
23rd September 2015, 17:13
http://www.buddy-icons.info/img/smile/1609.gif

lol I didnt see that one :bowdown: