Metal coolant pipe replacements

[PastiePaul]

I have a rover 75 diesel auto Conny SE, September 02 Manu.
I need to find urgently this part number or part.
I am looking for the metal coolant pipe which is joined to the rubber hose which immediately comes from the bottom of the plastic filler tank on the coolant system It also connects to a thinner rubber hose and looks like an "h" in shape at its end and just after the hanging bracket it has another spur to the ECG ? Unit.
Thank you for any and all help
Cheers Pastiepaul

[Dragrad]

Post moved to it's own thread so as not to hi-jack another member's thread ;) (PM sent to advise):D

Any pics of the part that you are looking for ? :bowdown: May help members to better respond to your query.....;)

Have a look here for Rimmers Bros (http://www.rimmerbros.co.uk/SubCategory--Rover-75--m-1616) parts listings.....

[Arctic]

Post moved to it's own thread so as not to hi-jack another member's thread ;) (PM sent to advise):D

Any pics of the part that you are looking for ? :bowdown: May help members to better respond to your query.....;)

Have a look here for Rimmers Bros (http://www.rimmerbros.co.uk/SubCategory--Rover-75--m-1616) parts listings..... Hi Andrew
It maybe this one below in the links PEP103190
http://www.rimmerbros.co.uk/Item--i-PEP103190



http://www.ebay.co.uk/itm/Rover-75-diesel-coolant-pipe-Part-no-PEP103190-/361592483958?hash=item5430977076:g:49kAAOSw7NNUGKD T

http://www.ebay.co.uk/itm/ROVER-75-DIESEL-STEEL-COOLANT-HOSE-PIPE-/321641103665?hash=item4ae34dc131:g:zWYAAOSwm8VUtQf I

http://www.mgroverpartfinder.com/Distributor-PEP103190---PIPE+ASSEMBLY-ENGINE+COOLANT.aspx

[PastiePaul]

No it's not one of those in the photos. Due to the fact of my earlier incorrect description no doubt!
It's quite a narrow metal pipe which is "h" in shape and connects to the rubber hose at the bottom of the plastic filler tank The smaller bit of the h ends off in the direction of the oil filter via another rubber hose and lager "h" tail heads off over the auto gearbox and down into the engine. Just after the "h" end there is a welded bracket.
Anyone any ideas?
Cheers

[Arctic]

No it's not one of those in the photos.
It's quite a narrow metal pipe which is "h" in shape and connects to the rubber hose at the bottom of the rad. The smaller bit of the h ends off in the direction of the oil filter via another rubber hose and lager "h" tail heads off over the auto gearbox and down into the engine. Just after the "h" end there is a welded bracket.
Anyone any ideas?
Cheers Hi Paul.
Most likely this one then below, hard to come by so try one of the traders on here, or a scrap yard.

(PEP000130)

http://www.rimmerbros.co.uk/Item--i-PEP000130

There is one on fleabay
http://www.ebay.co.uk/itm/Rover-75-2-0-CDTI-Inlet-Manifold-To-Heater-Coolant-Pipe-PEP000130-/172235739444?hash=item281a0cd134:g:24UAAOSwnNBXWXu e

[PastiePaul]

Cheers Artic for your efforts but again it's my fault, I should have added that there is another spur just after the hanging bracket which goes to the ECG ? Unit. Otherwise the photo is correct....Thank you for your patience.
Pastiepaul

[tourer]

Cheers Artic for your efforts but again it's my fault, I should have added that there is another spur just after the hanging bracket which goes to the ECG ? Unit. Otherwise the photo is correct....Thank you for your patience.
Pastiepaul

Blimey, didn't know they were fitted with heart monitors now.:}:}
Only joking.

[PastiePaul]

Post moved to it's own thread so as not to hi-jack another member's thread ;) (PM sent to advise):D

Any pics of the part that you are looking for ? :bowdown: May help members to better respond to your query.....;)

Have a look here for Rimmers Bros (http://www.rimmerbros.co.uk/SubCategory--Rover-75--m-1616) parts listings.....

I would happily add a photo if I had a clue how to do it.

[Dragrad]

I would happily add a photo if I had a clue how to do it.

Check out my signature links, there's a How To or two in there somewhare ;);)

[PastiePaul]

This metal coolant pipe is unique to the Auto Diesel......so rare......any ideas?
Thanks

[Arctic]

Cheers Artic for your efforts but again it's my fault, I should have added that there is another spur just after the hanging bracket which goes to the ECG ? Unit. Otherwise the photo is correct....Thank you for your patience.
Pastiepaul


HI Paul.
Do you mean the EGR unit if so could you be talking about one of these below, but yours being a Auto will have a cooler on the side also, few links to Rimmers

http://www.rimmerbros.co.uk/Item--i-GRID001956