PDA

View Full Version : ZT Mk1 Boomerang Spoiler Fixings?


directstep
19th June 2016, 19:10
Had to remove my Boomerang spoiler for repair/spray but it appears to have come off incorrectly (or I did it wrong!).

The problem are the forward fixings (accessed under the rubber bungs).

The spoiler has come off but the two rear fixings are still attached (locked) into the boot lid.

Both sides are really rusted/corroded and have some sort of fastener still rusted on which looks like it maybe preventing proper removal of the bolt from in the boot lid. The bottom of the spoiler now just has holes where I assume these fasteners plug into.

Looks like I'll have to carefully hacksaw through the fasteners/bolts.

Anyone know anything please? Are new fasteners/bolts available or a long-shot, has anyone got any please?

Greeners
19th June 2016, 20:30
Bond in some riv-nuts into the spoiler
http://www.memfast.co.uk/CLI/MEM001/Images/aklmprimary.jpg

ricardo65
20th June 2016, 08:43
As above use rivnuts if you are very careful you should be able to compress them a little