View Full Version : Diag readings
Roverpip
5th November 2017, 18:59
Hi, having had my diag read in order to determine which of my ABS sensors is at fault, it also showed up the following errors
https://1drv.ms/i/s!AsprbdmvG_qZoH_oecnbirYY00aQ
Needles to say they were all cleared & have not re-occurred. However I'm
interested to know what 'CAN data error' 'Terminal R' & K-Bus are?
Any help as ever greatly appreciated.
Phil
Supervinnie40
6th November 2017, 07:32
This might help on the K-bus:
https://support.industry.siemens.com/tf/WW/en/posts/difference-between-c-bus-k-bus-and-p-bus/57678?page=0&pageSize=10
The CAN error seems to be pretty comprehensive thing to understand: https://en.wikipedia.org/wiki/CAN_bus
Afraid I couldn't find anything useful on Terminal R.
marinabrian
6th November 2017, 07:44
Hmm spurious to say the least :getmecoat:
None of those appear to relate to your ABS issues, unless the ECM is not communicating on the CANBUS with the ABS ECU :shrug:
I would have the car read with T4 to determine what the actual cause of your fault is ;)
Brian :D
Mike Noc
6th November 2017, 08:00
All in this thread Brian; https://the75andztclub.co.uk/forum/showthread.php?t=273686
Mickyboy
6th November 2017, 14:17
Those fault codes have obviously been read on something other than T4, I would hazard a guess that is a Canbus Error communicating with the ABS module. I would also be interested to know whether the ABS module goes through self test mode, I’m guessing it doesn’t..
Mick
vBulletin® v3.8.11, Copyright ©2000-2024, vBulletin Solutions Inc.