WinCe Logo change

[championdaddy]

Ok......I've searched and can't find it....... :getmecoat:

I need to know how to change the logo when you go from radio and start the Satnav up.

This is NOT the Flash screen picture when you get in the car and turn the unit on............ I've found and done that one.

Any ideas anybody ???

[Teflon]

Here's how I did it on my Win CE unit:

For the splash screen and background in iGo 8:

pop the SD card with iGo 8 into your PC and navigate to the folder IGO834\Branding zip\ui_igo8\800_480.
Relace the file "Loading.bmp" with the pic of your coice. (has to be size 800x480 and in .bmp format I believe)


For the iGo 8 background:
pop the SD card with iGo 8 into your PC and navigate to the folder IGO834\data.zip\uigo8\800_480\background.
Add the pic you want to that folder (again size 800x480 in bmp format)
Replace the SD card in the double din and run iGo (admiring your new splash screen while it loads )
From the menu in iGo 8 select "settings", then "Menu". You should have a list of backgrounds to chose from, including the one you added.


As always with this sort of thing, make a backup of the iGo files first, just in case it all goes pear shaped :}.

Hope this helps,

Cliff

[championdaddy]

Thank you squire......will have a pop at that in the morning ! :)

[T-Cut]

I see you have a ZT, but these are what I've substituted in my WinCE system.

https://www.mediafire.com/convkey/c58e/i1krggvvmsn95rj6g.jpg

https://www.mediafire.com/convkey/50b1/sxuaiv6oht50rvv6g.jpg

https://www.mediafire.com/convkey/1f5d/0nwezo81qqnqhq16g.jpg

You could make similar with an MG logo.

These are a mix of .jpg and .bmp file types so it's happy with either. The chore is putting them in all the right places.

TC