View Full Version : PCB repairable?
madmatt
6th June 2018, 21:38
Can anyone who works with pcbs or in the know tell me if it's repairable thanks Matt
https://imgur.com/W0Fl8OU
marinabrian
6th June 2018, 22:05
Can anyone who works with pcbs or in the know tell me if it's repairable thanks Matt
https://imgur.com/W0Fl8OU
Not fancy just getting another drivers switch pack?
It could be repaired, but it would require a lot of time and fannying around ;)
Brian :D
madmatt
6th June 2018, 22:10
Well normally yes but it's a power fold switch pack and everyone seems to want silly money for them
Jim Jamieson
6th June 2018, 22:18
I might be wrong but are all the drivers switch pack PCBs not the same.
I’m sure I read somewhere that you just had to add the extra switch on the switch pack for powerfolds.
madmatt
6th June 2018, 22:24
The pcbs are the same but there must be extra components on the board as I tried swapping the boards and got no joy but I can short the broken one with a piece of wire and get the mirrors to fold as it's the Fold switch that's damaged
wullie480
7th June 2018, 08:48
Well normally yes but it's a power fold switch pack and everyone seems to want silly money for them
Keep your eye on eBay and sale section here I've seen them sell for £20 - £30 so not silly money.
Admittedly some are overpriced on eBay at £60 - £70 but can't see them selling at that.
philm
7th June 2018, 09:31
The pcbs are the same but there must be extra components on the board as I tried swapping the boards and got no joy but I can short the broken one with a piece of wire and get the mirrors to fold as it's the Fold switch that's damaged
As you can get it work by shorting with a length of wire just solder it in place not as if you will see it when put back in casing.
Depending how fussy you want to be.
vBulletin® v3.8.11, Copyright ©2000-2024, vBulletin Solutions Inc.