Premium bumper for sale

[Jezzer 1]

Anybody looking for one of these?
http://cgi.ebay.co.uk/ROVER-75-V8-MK2-FRONT-BUMPER-BRAND-NEW-IN-PRIMER_W0QQitemZ200347655832QQcmdZViewItemQQimsxZ2 0090531?IMSfp=TL090531124001r8077

[Lates]

Personally would not pay £250 for it considering the rest of the trim is not available.

[WeeMan]

;) that's the hard bit!..... finding all the trim to go with it.

[JohnDotCom]

Ridiculous price as is.
I have several of these stored and awaiting day can get chrome trim surround.
Unless some nutter wants to pay that amount...........

[The_Monk]

Does anyone have the part numbers for all the bit required to make up a full bumper?

[stocktake]

I think you will find this seller sold his last one for under £80 to a member on here Via ebay ;)

[Jules]

IIRC someone listed all the part numbers on here previously for premium bumper.

The seller above also sold some ROVER 75 17 inch CONTEMPORARY ALLOY WHEELS back in may (hidden bidders!)

http://cgi.ebay.co.uk/ROVER-75-17inch-CONTEMPORARY-ALLOY-WHEELS-SET-OF-FOUR_W0QQitemZ200340933363QQcmdZViewItemQQptZUK_Ca rParts_Acc_Wheels_tyres_Rims_Car_Wheels_ET?hash=it em2ea5400af3&_trksid=p3911.c0.m14&_trkparms=66%3A2|65%3A13|39%3A1|240%3A1318|301%3A1 |293%3A1|294%3A50

I see they are back on sale again:shrug:

[Kandyman]

Below is a list of parts needed, some parts are others have not used on there install.

DPC001280LML Cover assembly - front bumper
DQY000370LFG Grille assembly - Cycoloy Grey - upper
DQY000380LFG Grille assembly - Cycoloy Grey - lower
DQY000390LFG Grille assembly - Cycoloy Grey - RH side
DQY000400LFG Grille assembly - Cycoloy Grey - LH side
DXJ000060 Deflector - air (Can do without)
DPG000160 Bracket - upper infill mounting (Can do without)
DPR000160MMM Finisher - polished – grill
DPJ000200 Foam-front bumper infill (Can do without)
DPJ000210 Foam-front bumper infill (Can do without)
DPF000340LML Panel-fog lamp blanking - RH, primed
DPF000350LML Panel-fog lamp blanking - LH, primed
DPC000990LML Cover-front bumper tow eye access - Primer

[Rabett_Rover]

I think you will find this seller sold his last one for under £80 to a member on here Via ebay ;)

That be me! I will have an intresting summer in front of me sourcing the parts.

[JohnDotCom]

Best of luck,
I've sourced everything for my stock now except the Chrome surround!! http://www.the75andztclub.co.uk/forum/images/icons/icon9.gif

[Jezzer 1]

This may be a daft question, but does anyone know who the original supplier of the chrome surround was? There must be some press tools
around somewhere to stamp them out. If the tools exist, it would still be
possible to produce a run of the surrounds.

[Lates]

I was led to believe the tooling got shipped across the water.

[JohnDotCom]

Tooling is now in China!!

[Lates]

So I believe...