PDA

View Full Version : A few problems


Dudley 75
27th June 2009, 18:00
I have got a few problems which I would be grateful of some advice please.
2000 club, v6 auto. 71k

1) Engine running lumpy. All spark plugs renewed with correct spec, all ht leads checked and ok, injector cleaner runthrough. Anything else I should check?

2) I have noticed jerking when pulling off at low revs (gears all changing correct) and when taking power and also when I take my foot the go peddle! Would this be a cv joint?

Cheers.

Paul

Tatts
27th June 2009, 18:03
Could be fubar'd VIS motors, dodgy inlet manifold, clogged air filter, etc etc etc. Maybe give Lates a shout, he's local(ish) to you. www.lates600.com

Sounds like the lower engine mount (aka pendelum mount). Again, Lates can inspect, order & fit a new one.

miketata
28th June 2009, 00:19
there are reports of leads not seating home properly.

bl52krz
29th June 2009, 18:10
there are reports of leads not seating home properly.
when i had my sd1,bought new plugs and ht leads."halfrauds".
three weeks later found that at about 1500-2000 revs there was a slight judder when accelerating.took it to halfrauds and they put it on there diagnostic machine, and straight away found a faulty ht lead.changed it, and everything was o/k.
just goes to show that because you have fitted new leads , they could still be u.s.