PDA

View Full Version : Fliers please


JP53
8th November 2006, 18:34
I saw this gorgeous blonde drive past my house in a 75 today and after nearly tripping over my tongue it occurred to me that I would love to get her in the club (suddenly remembers wife reads this so please read old minger for gorgeous blonde) and I cant down load the flyers any chance of posting another. There are loads of 75's by me (it must be the close proximally of the old folks home) and I'm sure I could persaude a few (dons balaclava) to join our happy throng. John.

Christopher
8th November 2006, 18:38
I saw this gorgeous blonde drive past my house in a 75 today and after nearly tripping over my tongue it occurred to me that I would love to get her in the club (suddenly remembers wife reads this so please read old minger for gorgeous blonde) and I cant down load the flyers any chance of posting another. There are loads of 75's by me (it must be the close proximally of the old folks home) and I'm sure I could persaude a few (dons balaclava) to join our happy throng. John.

Hmm! "I would love to get her in the club ..." following " ...this gorgeous blonde" ... are you talking about 75s and ZT's here???

I'll see what I can do ;)

JP53
8th November 2006, 18:43
Hmm! "I would love to get her in the club ..." following " ...this gorgeouos blonde" ... are you talking about 75s and ZT's here???

I'll see what I can do ;)

Thanks mate. A bit of the "carry on's" me thinks. :D

Ken
8th November 2006, 18:46
Hmm! "I would love to get her in the club ..." following " ...this gorgeous blonde" ... are you talking about 75s and ZT's here???

I'll see what I can do ;)

Christopher the one that Bri did would be fine apart for the url? Have we got a copy of that...........or are you going to play with your etch-a-sketch :lol:

Christopher
8th November 2006, 19:04
Christopher the one that Bri did would be fine apart for the url? Have we got a copy of that...........or are you going to play with your etch-a-sketch :lol:

Ken, I've fiddled with my "etch-a-sketch" and here we go ;)

GreyGhost
8th November 2006, 19:09
Ken, I've fiddled with my "etch-a-sketch" and here we go ;)

Excellent Chris Andy and I were only talking about this yesterday.

I'll run a few off.

You can give it a shake now. (the etch-a-sketch I mean)

Ken
8th November 2006, 19:11
Ken, I've fiddled with my "etch-a-sketch" and here we go ;)


Nice one Christopher :D

Kandyman
8th November 2006, 19:17
Super duper,

I was going to get some business cards made up the said

"You have just been visited by the owners club"
And then all that club blah blah

JP53
8th November 2006, 19:25
Nice one Christopher :D

Thanks Christopher. So can I print them off and start giving them out?

GreyGhost
8th November 2006, 19:26
Thanks Chris. So can I print them off and start giving them out?

Haven't you started yet?
Just hurry up will you. I'm sure you can deliver some before bed time:)

JP53
8th November 2006, 19:32
Haven't you started yet?
Just hurry up will you. I'm sure you can deliver some before bed time:)

The production line is up and running. I can deliver them tonight when I'm limping around the streets after my Mrs reads the start of this thread :D

Dave Goody
8th November 2006, 19:35
As a complete dope with a keyboard, can somebody adjust the flyer to 2 copies on an A4 sheet Thanks Dave

Zeb
8th November 2006, 19:39
Umm...is it just me or does that flier make us sound like a weird cult?
'We pay tribute to......'


Probably just me.....

*Closes door quietly behind himself...*

GreyGhost
8th November 2006, 19:42
As a complete dope with a keyboard, can somebody adjust the flyer to 2 copies on an A4 sheet Thanks Dave

What programme do you want them in?

JP53
8th November 2006, 19:42
Umm...is it just me or does that flier make us sound like a weird cult?
'We pay tribute to......'


Probably just me.....

*Closes door quietly behind himself...*

Hi Zeb. We must be a weird cult they let me in!

GreyGhost
8th November 2006, 19:47
Sorry silly question re programmes I'll post a PDF and alink to it back in a mo.

OK It's here 2 to a sheet A4

http://homepage.mac.com/mgzt180/.cv/mgzt180/Sites/.Public/Flyers.pdf-zip.zip

Zeb
8th November 2006, 19:48
Hi Zeb. We must be a weird cult they let me in!


True...very true...:rolleyes:

GreyGhost
8th November 2006, 19:51
Sorry silly question re programmes I'll post a PDF and alink to it back in a mo.

OK It's here 2 to a sheet A4

http://homepage.mac.com/mgzt180/.cv/mgzt180/Sites/.Public/Flyers.pdf-zip.zip

Sorry posted original accidently it's OK now :)

Dave Goody
8th November 2006, 19:51
Sorry silly question re programmes I'll post a PDF and alink to it back in a mo.

OK It's here 2 to a sheet A4

http://homepage.mac.com/mgzt180/.cv/mgzt180/Sites/.Public/Flyers.pdf-zip.zip

Thanks Dave

JP53
8th November 2006, 19:55
Sorry posted original accidently it's OK now :)

I've clicked on that and there is loads of stuff on it mate, sure you have sent the right one? John.

JP53
8th November 2006, 19:58
True...very true...:rolleyes:

Just think of me tonight as I limp around the dark cold wet streets peddeling our wares and trying to think of ways to grovel back into the wifes not quite so bad books.:(

GreyGhost
8th November 2006, 20:01
I've clicked on that and there is loads of stuff on it mate, sure you have sent the right one? John.

Just tried it may be damaged I'll post it again hang on, not my day obviously :)

Christopher
8th November 2006, 20:02
Do you need my etch-a-sketch GreyGhost???? ;)

Zeb
8th November 2006, 20:03
Just think of me tonight as I limp around the dark cold wet streets peddeling our wares :angel2: and trying to think of ways to grovel back into the wifes not quite so bad books.:(

Peddling your wares??? ewwwwww!:eek:

GreyGhost
8th November 2006, 20:04
Do you need my etch-a-sketch GreyGhost???? ;)

Nope I renamed the file before it had finished uploading and that corrupted it.

This should be OK now

http://homepage.mac.com/mgzt180/.cv/mgzt180/Sites/.Public/Flyers.pdf-zip.zip

All the links in all the mails I have recently ballsed up are now fixed and any one will download the correct PDF

At leasty this is keeping my post count up :)

driverjgp
8th November 2006, 20:06
Hmm! "I would love to get her in the club ..." following " ...this gorgeous blonde" ... are you talking about 75s and ZT's here???

I'll see what I can do ;)



MMMmmmmmm you said what I was thinking, perhap you may want to re phrase John errrrr mabe not. :D

JP53
8th November 2006, 20:10
MMMmmmmmm you said what I was thinking, perhap you may want to re phrase John errrrr mabe not. :D

To late mate. I'm writing this whilst hanging upside down suspended by a certain part of my anatomy. It could be worse she could light the fire, oh hang on (desperately starts to blow)..........

driverjgp
8th November 2006, 20:12
To late mate. I'm writing this whilst hanging upside down suspended by a certain part of my anatomy. It could be worse she could light the fire, oh hang on (desperately starts to blow)..........

OOOOOUUUUUCCCCHHHHH some blokes would pay for that :D LOL

JP53
8th November 2006, 20:13
Nope I renamed the file before it had finished uploading and that corrupted it.

This should be OK now

http://homepage.mac.com/mgzt180/.cv/mgzt180/Sites/.Public/Flyers.pdf-zip.zip

All the links in all the mails I have recently ballsed up are now fixed and any one will download the correct PDF

At leasty this is keeping my post count up :)

Splended job this time, spot on.:)

Zeb
8th November 2006, 20:13
OOOOOUUUUUCCCCHHHHH some blokes would pay for that :D LOL

Dontcha know? He does. See him and her at WWW. oops mebbe not :D

JP53
8th November 2006, 20:15
OOOOOUUUUUCCCCHHHHH some blokes would pay for that :D LOL

I would, if I did not have to put so much blooming petrol in my car. I'm sure it's got a leak some where!

driverjgp
8th November 2006, 20:17
I would, if I did not have to put so much blooming petrol in my car. I'm sure it's got a leak some where!

LOL :group:

JP53
8th November 2006, 20:18
Dontcha know? He does. see him and her at WWW. oops mebbe not :D

So are you the one who's not paid their subscription yet? It's not free you know except Thursdays and if you are over 80 and with both parents.;)

Dave Goody
8th November 2006, 20:46
Splended job this time, spot on.:)

Errm, I still cant open it, "he whispers quietly"

GreyGhost
8th November 2006, 20:49
Errm, I still cant open it, "he whispers quietly"

It's compressed zipped up as you PC people say.

send me your address to [email protected] and I will post it to you uncompressed.

JP53
8th November 2006, 20:51
Errm, I still cant open it, "he whispers quietly"

Have you double clicked on the white and red envelope shaped thingey (all technical terms to us computer buffs) :o

Dave Goody
8th November 2006, 20:56
It's compressed zipped up as you PC people say.

send me your address to [email protected] and I will post it to you uncompressed.

Im getting the same message not the right file type or damaged?
xxxxxxxxxxxxxx Cheers Dave

GreyGhost
8th November 2006, 21:03
Im getting the same message not the right file type or damaged?
[email protected] Cheers Dave

On it's way Dave

I have attached 2 files to the mail 1 in .pdf format and a duplicate in .jpg format. One at least will work.

JP53
8th November 2006, 21:27
On it's way Dave

I have attached 2 files to the mail 1 in .pdf format and a duplicate in .jpg format. One at least will work.

I've posted the first 5.

GreyGhost
8th November 2006, 21:38
I've posted the first 5.

Don't believe a word, you've been posting silly jokes on here for the last half hour.
Sorry, my apologies "really silly jokes" don't want to be sued for libel :)

Keith
25th January 2007, 18:09
Big Bump

Come on troops I am sure you can post one flier each over the weekend. 11 more members will make it a round 800

Simon
25th January 2007, 20:24
Weather making posting fliers a tad difficlt... last week they all blew away and this week they're all turnig into little A5 sheets of ice ;) :rofl:

ColinB
25th January 2007, 21:24
Hi all, little tip here that I found by accident (ok, I was bored).

I found that the 2 to a page pdf wasn't as sharp as the 1 to a page one. If anyone else has the same problem here is a fix.
Use the whole page pdf http://www.the75andztclub.co.uk/forum/attachment.php?attachmentid=73&d=1163016243
Click the "print" icon and under "page scaling" select "multiple pages per sheet".
Then make "pages per sheet"= "2".
Click "print" and they print out nice and sharp.

JohnDotCom
25th January 2007, 21:47
Hi all, little tip here that I found by accident (ok, I was bored).

I found that the 2 to a page pdf wasn't as sharp as the 1 to a page one. If anyone else has the same problem here is a fix.
Use the whole page pdf http://www.the75andztclub.co.uk/forum/attachment.php?attachmentid=73&d=1163016243
Click the "print" icon and under "page scaling" select "multiple pages per sheet".
Then make "pages per sheet"= "2".
Click "print" and they print out nice and sharp.

I Just clean them up, make them Sharper in Photoshop then add Introduced by JohnDotCom on bottom plus direct referal address, in my case:

http://www.the75andztclub.co.uk/forum/index.php?referrerid=314 :lol:

I print them on Colour Inkjet but then Laminate them to keep them dry.
You may find one on your car in Wales and at Major Airport Car Parks!!

Simon
25th January 2007, 22:07
I Just clean them up, make them Sharper in Photoshop then add Introduced by JohnDotCom on bottom plus direct referal address, in my case:

http://www.the75andztclub.co.uk/forum/index.php?referrerid=314 :lol:

I print them on Colour Inkjet but then Laminate them to keep them dry.
You may find one on your car in Wales and at Major Airport Car Parks!!

Ah ha!!! I always wondered what the "Referals" meant in your user profile...

Or is that for something else?

JohnDotCom
25th January 2007, 22:10
Ah ha!!! I always wondered what the "Referals" meant in your user profile...

Or is that for something else?
No thats it Simon, if a person types in that address & joins it adds to Your Referals in your Profile. I only realised recently myself, was giving out leaflets with just the normal web Address, now I won't know if any worked..

Keith
11th April 2007, 10:25
Bump for newbies

Kandyman
19th May 2007, 08:37
*cough*

Any members wanting flyers to print out and advertise the club, slip one on that parked up 75/ZT you see parked up at the shops.

http://www.the75andztclub.co.uk/forum/attachment.php?attachmentid=73&d=1163016243

Or Try

http://homepage.mac.com/mgzt180/.cv/mgzt180/Sites/.Public/Flyers.pdf-zip.zip

ColinB
19th May 2007, 08:55
*cough*

Any members wanting flyers to print out and advertise the club, slip one on that parked up 75/ZT you see parked up at the shops.

http://www.the75andztclub.co.uk/foru...3&d=1163016243
Or Try
http://homepage.mac.com/mgzt180/.cv/...rs.pdf-zip.zip

Hi Kandyman, that top link isn't working for me but this one does

http://www.the75andztclub.co.uk/forum/attachment.php?attachmentid=73&d=1163016243

Kandyman
19th May 2007, 09:00
Many Thanks Colin,

Link sorted :)

GreyGhost
19th May 2007, 09:00
Well done Colin, we were just sorting this out.

ColinB
19th May 2007, 21:55
No worries!:D

JohnDotCom
26th May 2007, 00:53
Well done Colin, we were just sorting this out.

Still not working GG, Members will have to use your own Mac HomePage Link still. :)

http://homepage.mac.com/mgzt180/.cv/...rs.pdf-zip.zip

baxlin
13th June 2007, 15:12
Printed a load of fliers off last night, used 4 today - Hemel, Berkhamsted and Ladbroke Grove, W11.

Malcolm

GreyGhost
13th June 2007, 16:03
Link for flyers:-

http://homepage.mac.com/mgzt180/.cv/mgzt180/Sites/.Public/Flyers.pdf-zip.zip

JohnDotCom
13th June 2007, 22:00
:oh you: Thats what I put, Your Link, two above your Post GG. :pillow:

GreyGhost
14th June 2007, 09:47
:oh you: Thats what I put, Your Link, two above your Post GG. :pillow:

You'll get a 404 on that for some obscure reason. That's why I updated it. I know it worked before and I have not changed the location. Go figure. :pillow:

JohnDotCom
14th June 2007, 14:03
Sorry about that Mick. When I last tested OK. :confused:
Now 404 so God knows whats going on, get the same 404 error on Club Address one too. :shrug: