PDA

View Full Version : cambelt sevice ztt 190


jaffo
30th September 2010, 10:44
when is the cambelt service due on a ztt 190 in terms of years or mileage and whats the approximate cost?

im looking for a ztt and want to know so i can factor any costs into a deal.....:)

Zeb
30th September 2010, 10:57
when is the cambelt service due on a ztt 190 in terms of years or mileage and whats the approximate cost?

im looking for a ztt and want to know so i can factor any costs into a deal.....:)

90,000 miles or 6 years...and usually best to get the water pump done at the same time...cost is roughly £450 by the likes of Mr Lates here on the forum...

Dave Goody
30th September 2010, 10:59
when is the cambelt service due on a ztt 190 in terms of years or mileage and whats the approximate cost?

im looking for a ztt and want to know so i can factor any costs into a deal.....:)

6 years or 90k miles whichever 1st
belts, idler, pulley,tensioners and water pump are the std kit at this time
Allow £400 -£600 for the job Dave

jaffo
30th September 2010, 11:01
thanks...any other major costs likely on a 80/90k 190?

Dave Goody
30th September 2010, 11:02
6 years or 90k miles whichever 1st
belts, idler, pulley,tensioners and water pump are the std kit at this time
Allow £400 -£600 for the job Dave

Damn, 2 mins too late:D

Dave Goody
30th September 2010, 11:04
Might be worth replacing thermostat housing and cam cap seals, check vis motors ok and no rattle from the Inlet manifold Dave

jaffo
30th September 2010, 11:16
thanks all for that...now,how do i check the vis motors etc!

my questions never end!

Rabett_Rover
30th September 2010, 11:27
thanks all for that...now,how do i check the vis motors etc!

my questions never end!

Come to a meet where there will be a VIS tester present such as the Wolves Nano Meet this weekend or borrow the clubs VIS tester. Simplz:D