PDA

View Full Version : HELP! Wish i had read the intructions!!

DERV_ROVERRARI
29th January 2011, 08:37
My trip computer wasnt working so decided to have a go at fixing it by removing the indicator stalk. Very easy to do and the trip computer is now working perfectly again. :)

Problem is for some reason i removed the 4 screws in the back of the stalk and the insides of my idicator fell out! Now ive had a go at puting it back together as it cant be rocket science, put it back on the car and it is contantly indicating right. You can turn this off. Full beam works but only if you hold it on. Any ideas where i could find a diagram or can anyone help me?!

http://i42.photobucket.com/albums/e302/jtasker/SL731930.jpg
DERV_ROVERRARI
29th January 2011, 09:54
FIXED!! thank god!
FLYER
29th January 2011, 10:10
that's the quickest fix iv'e ever seen on here , glad to be of help mate . Lol.
FredSpencer
29th January 2011, 10:50
FIXED!! thank god!

All you need to do now is post a How-to. ;)
DERV_ROVERRARI
29th January 2011, 11:12
Haha, dont take it apart in the first place is the answer!
robwijnstok
29th January 2011, 16:34
…And if you do, and it falls apart, call DERV ROVERRARI to fix it!:p:
kaiser
29th January 2011, 18:56
Well, if everything fails, get the wife to read the manual! ;)

I usually take pictures, mainly because you could be sidetracked and forget.
It always looks easy, until it has to go back together, or you have assembled it and are left with three screws and no place to put them!
graham2230
29th January 2011, 20:14
3 screws would be ok, try one small end circlip on a V16 engine.

Now that causes a panic!
kaiser
29th January 2011, 20:25
At least you have a 6% chance of hitting the right cylinder.
I take it not a Rover, not even a Meteor!
graham2230
29th January 2011, 20:34
Kaiser,

No, not a rover or car of any kind, great big ****** diesel in a boat.

Could have been worse, could have been a V24 gas engine lol