Complete Front Suspension Assemblies - 75 / ZT - In Stock. Genuine Delphi
 

Just a quick heads up,
We have a few sets of Genuine MG Rover, Delphi-branded Front Suspension Assemblies in stock.

We have 3x RH Rover 75 assemblies, and 15 pairs of MG ZT assemblies:
https://www.dmgrs.co.uk/collections/...genuine-delphi

Much, much cheaper than changing everything part by part. :)

email sent re above.

Did you get a reply? I can't recall talking to you about these, but it's been a long day! :)

Yes all sorted and fitted now.

WRT my concerns about spring height if used with the V6 model. The vehicle seems to sit nicely and does not look low IMO.

I was wondering the same , how does it affect in a diesel auto tourer ? Does it going to be hard on the springs and shocks because is the weight increase ?

Complete Front Suspension Assemblies
 

I bought these for my V6 Connie, had them fitted yesterday car is very slightly lower, but on the 2 hour drive home no issues at all, no bottoming out or anything.

I've since fitted another set to a diesel, and took the car for a test drive - it drove lovely, and looked pretty much identical to how it did before.

Gone was the bad wallowing and 'unstable' feeling, though!
1 set left for ZT, 4 for 75. :)

Mat, is your email working at the moment? I've been trying to contact you about a refund on the suspension parts. Orders 14342/14341.


Sent from my iPhone using Tapatalk

Hello Tom, all sorted now - we did have a few issues, but all resolved.

Just a quick heads up, after quite a few requests for these we're due new stock in April. :)

That's good, I will be ready for buying new sets for mine by then, when they are available.

Steve.

Any sign of these coming back in stock?

I'd pre-ordered some, but received a refund yesterday. I presume there had been an issue getting hold of them?

Hello all,
Unfortunately we received a lot less of these than we'd hoped - it seems some were damaged before packing to us, but even so we received less than we expected with the revised quantities.

Our next import is scheduled for the last quarter of the year, and if there's any more available we'll be the first to snap them up. :)

Matt,

Any news on some more of these?


Steve.

Hello Steve, good news - we have some more on the way, however only in ZT specification so far. :)

Still interested in a set for both sides when available!!!

Steve.

We don't have full sets for the 75, but have them for the ZT :)

I tried to look at this fot my ZT-T however the link in the first post is "Page Not Found"

Sorry about that - link updated now. :)

Am I right in reading you have a r/h set for a 75?


Steve.

We currently have 2 RH units for a 75, yes :)

Mat, are the drop links on these the OEM ones?

https://www.dmgrs.co.uk/collections/...genuine-delphi

Hello there, yes - they are.

Do you have a pair of front springs + dampers for a Mk2 75?

Unfortunately not - we do have some dampers that fit the 75, but not the springs. The dampers are bare units only. :)

Fair enough, I can easily get the springs from euro car parts.

How much for the dampers?


Sent from my G8341 using Tapatalk

Matt, ive sent you a couple of PMs regarding springs but then remembered you have these complete units! Rather than messing about with just changing springs im probably better paying a bit more and fitting these complete units.

They are described as "standard suspension". Can I assume this is the same as "Comfort" ?

Matt you have a PM