Facelift headlight washer jet connector
Hello I need one of these;
http://i94.photobucket.com/albums/l8...psfaszxh1u.jpg As far as I know only the facelift cars had them to connect the headlight washer jets to the hoses, the others had a right angle connector on the jet itself. Please PM me if you can help. Thanks, Paul. |
Quote:
|
Thanks. Would the earlier car have one on the pump end of the pipe then?
|
Quote:
|
i can confirm after looking at a spare hose the following.the connector on the pump end is angled plus the end two connectors on the hose at the jet end only the inner jets out of the four on the early are in fact straight
|
Quote:
|
Quote:
Do you need the little plastic clip as well or just the connector? |
Connector and clip please. Please PM me with your address and price.
Thanks, Paul. |
Are you needing one of these to join the pipe to the pump?
The reason I have one is because they leak so I connected the pipe directly to the pump using a jubilee clip instead. You are welcome to the thing but I would seriously do what I did instead. Let me know mate. |
I need to connect the washer jet to the end of the hose. It has the 90 degree fitting in the pic. This is the good one the other one got broken in accident. (see " Do you know this ZT" thread in the general forum)
I need the 90 degree bend to make the connection between the jet and hose. If it leaks I will put some hose clips on the 90 degree connector. Thanks for your kind offer. I'll PM you my address. |
All times are GMT. The time now is 08:20. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd