The 75 and ZT Owners Club Forums

The 75 and ZT Owners Club Forums (https://www.the75andztclub.co.uk/forum/index.php)

- The 75 and ZT Owners Club General Forum (https://www.the75andztclub.co.uk/forum/forumdisplay.php?f=9)

- - Newbie (https://www.the75andztclub.co.uk/forum/showthread.php?t=75160)

Help. Does anyone know where I can get a lead to connect a CD autochanger to a Rover CR 80 radio/cd. The stacker is marked SDC-652
Part no. XQE000580. I want to fit it in the boot.

Quote:

Originally Posted by theoldcodger (Post 644135)

Help. Does anyone know where I can get a lead to connect a CD autochanger to a Rover CR 80 radio/cd. The stacker is marked SDC-652
Part no. XQE000580. I want to fit it in the boot.

rimmers might have one
http://www.rimmerbros.co.uk/Item--i-GRID002041

Hi theolgcodger and welcome to the forum.

Went a step further after looking at then grid as i could not see the part number you specified there. Put your part no in Rimmers search box and came up with this,

http://www.rimmerbros.co.uk/Item--i-XQE000580

Unfortunately no longer available. The only thing i can suggest is that you phone round some specialist MG Rover breakers. Found this thread from 'tother side', a list of MG Rover breakers but it is from a few years back. Some may still be there though.

http://forums.mg-rover.org/showthread.php?t=154877

The other thing i have thought about is that maybe a local in car entertainment centre may be able to make one up for you if they have the right connectors

Hope this may help you,

Regards,

Dave.

if that is the case as above ,then maybe contact the traders on here as they may hae broken a car that had the lead in it