Help pls: Correct colour wiring for highline radio unit - parrot
 

Dear all,

I really hope someone can help me with this. I have already searched for hours, but I didn't find the correct answer.
Sometime ago my radio broke down due to a water damage and when the mechanic unpluged the radio he destroyed the wiring loom.
That is why some electric cables are now torn apart from the parrot adaptor and they have no documentation in the garage on how to rewire this again.

Basically I need the colour code of a highline radio unit (satnav Tv radio) for a MG-ZT 190 which I have (I think rover 75 owners could also help)
The simplest would be if someone could just upload a picture of their radio-wiring parrot in the boot.
The adaptor looks like this: (this is an old adaptor, round pins.)

http://i51.tinypic.com/2hxoxlu.jpg

My replacement radio is a BM24 because I could not find the original XQC000240.

The colous I have on the broken parrot adaptor are the following:

Pin1 - white-black
Pin2 - violet-black
Pin3 - brown-black
Pin4 - ?
Pin5 - green-white
Pin6 - green black
Pin7 - ?
Pin8 - grey-black
Pin9 - ?
Pin10 - empty
Pin11 - blue-black
Pin12 - red-black
Pin13 - empty
Pin14 - orange-black
Pin15 - black (a bigger cable)
Pin16 - yellow--violet
Pin17 - empty

The 3 loose cables are:

violet-white(or bright pink)
bright yellow-red
red-green

Can anyone tell me to which of the above numbers with the question mark they correspond?

THANK YOU VERY MUCH
mic165

Maybe it makes more sense if this thread is in the I.C.E. highline section of the forum.
Can an admin please move it there?...thx

Done ;) ...........

O.K, I've had a chance to look at my set-up and the notes I made when installing it taken from the workshop manual, and it's as follows:

Pin1 - white-black - (Speaker Left Front +)

Pin2 - violet-black - (Speaker Right Front +)

Pin3 - brown-black - (Speaker Left Rear +)

Pin4 - ? Red-Green - (Telephone Mute signal)

Pin5 - green-white - (Ignition Switch Power Supply)

Pin6 - green black - (Speaker Right Rear +)

Pin7 - ? White-Red-Yellow - (K Bus Connection)

Pin8 - grey-black - (Speaker Left Front -)

Pin9 - ? Purple-Pink (Battery Permanent Feed)

Pin10 - empty (Speed dependant Volume Signal - N/A)

Pin11 - blue-black - (Speaker Right Front -)

Pin12 - red-black - (Speaker Left Rear -)

Pin13 - empty - Not Used

Pin14 - orange-black - (Speaker Right Rear -)

Pin15 - black (a bigger cable) - (Earth)

Pin16 - yellow--violet - (Aerial Amplifier Switching Signal)

Pin17 - empty - Not Used


Hope that helps.