Went to clean the egr, and found a stainless egr bypass instead.... Bonus

Washed the mud off of "Ratty" and "Banana" after the 2nd day of the show.

at the lido
 

today I cleared out the plenum, lots of water in there. done the bonnet pull mod. put some led lights in the interior and wd40ed and cable tied the yellow sensors under the seat for the airbag light. thanks to all the guys that shared their knowledge.

Washed'n'polished the 1.8 this evening.

http://i1263.photobucket.com/albums/...ps8fb0e4e6.jpg

http://i1263.photobucket.com/albums/...psbb5efbb6.jpg

Loving the colour!!! :drool4:

Got round to sorting out a lot of little jobs such as making the sun visors stay in place, re-attaching lot of little bits of trim that had come loose or had been broken, got the sun blind working again.

Removed the Nokia car kit left in by a previous owner.

Also fitted a pair of pre-project drive rear quarter/c-pillar finishers with the Rover badge

http://i1159.photobucket.com/albums/...pse39b5597.jpg

;)

It took me ages to get an old laptop with XP on it to work, so I could work the scanner................... :D:getmecoat:

Fitted the auto-dip interior mirror - very worthwhile mod.

Only trouble is...........waiting for an excuse to go out at night to try it (rather than testing with a torch !).

Hi Bob, do you reckon you'll be able to mine working at Lulworth?

No problem Bill. ;)
The only issue I have is my old laptop (two, in fact, cobbled into one :D) has not been used for donkeys, and the battery is completely dead. :mad:

I will need to get a new battery, unless we can get our hands on an inverter. :shrug: