Continetal Headlight?
 

I have been told there is a switch on the back of our headlights that converts to driving on the continent, what should I be looking for .

Cheers.

Rev

There is a lever which you lift to convert beam pattern, only on projectors though:cool:
http://i303.photobucket.com/albums/n...beambender.jpg

Yes, I've moved this a couple of times. Rover, in their wisdom, designed it with a nice sharp edge too!

This is what happens inside.

https://www.mediafire.com/convkey/c4...0j498jbm6g.jpg

The lever covers the 'notch' that normally provides the kick-up at the LHS of the beam. When the lever is 'on' the kick-up is lost. It's worth knowing that because the usual outer edge kick-up you get is missing. Illumination of road signs is therefore less effective when driving on the right.



TC

Thanks for starting this thread, I never new about this and I am currently in France and my current eurolight stickers are all brown. So fun job for tomorrow Find the lever, cut my finger and then clean off the old glue.

Always something to do..:D:D

ONLY on Projector's;)

My rover has been to France a number of times without me altering anything. I just kept an old stick on blanking kit for a car I used to have in the glove compartment. If gendarmes had taken an interest in my car, I would have just stuck it on somewhere on the headlight. Just keep beam low at night.

I don't drive much at night...but am planning a continental trip...how do I know if I have projectors or not?

Post up a picture of your headlights and we will tell you 👍

And if you don't have them and want them I have a set for sale😁😁😁