Touring Boot storage
 

Hi guys.

Any one fitted the pre project drive boot foam storage?
I’ve tried taking out my current foam inserts by the two trim clips and I get some movement from the rear however about halfway it seams to get stuck. Is there some additional clips under the boot trim carpet?
https://uploads.tapatalk-cdn.com/202...e47f9026ac.jpg


Sent from my iPhone using Tapatalk

Hi Gavin.
You have to remove the sides on the tourer to inset the new foam tool inserts.

https://i.imgur.com/97x3QJul.jpg1

Which also means you need to remove the boot lid to remove the side properly.

https://i.imgur.com/pCuYkngl.jpg2

https://i.imgur.com/BGR8tPXl.jpg3

https://i.imgur.com/Y3SdUFyl.jpg4

as you go along you will see what you need to remove.

Cheers Arctic, think this might be a job for springtime now!


Sent from my iPhone using Tapatalk

I would say that is a good call as it's time consuming so a nice dry day is required.

PM me your email address and I will email you a PDF document I got from another Rover forum that explains how to take the trim that Artic refers to apart. It is "complicated"

macafee2

Hello Macafee,, Would it be too much to ask if I could have that doc too.. I had a flood last year and though all is well now I did not put the back of my tourer back together,, that doc would help immensely, thanks in advance