gunson service/oil reset tool
hi all
just thought I would pass this on. used a gunson service reset tool a few days ago. just a warning to all. I had did a oil and service reset on my 75 mk1 2.5 v6. it has taken the sevice miles to 120 thousand on the box it should take it to 15 thousand miles . and the oil miles has gone off the dash. all thats left on the ipk is mls. have take the battery off and for two days and its done nothing . so just be carefull steve |
I have never heard of that happening before!
Hopefully T4 can reinstate it for you. |
I have one and it resets diddly squat. Sounds like a case of two extremes
|
its totally gone.
used a bit of software from old Phil-T4 from years ago to reset. also take the battery off. even used toaf to see if there was a way . none have got it back. I guess it could be a problem on the car . but all was good till I used the reset tool. thanks steve |
Is this what you used Steve? If so, I'd say you need to contact Gunson and tell them what's happened.
Simon |
I used a gunsons reset on both my zt as well as a few local members and never had an issue with it.
Yours maybe faulty which has done something to the ipk. |
You need to be so careful of some of these generic code reader reset tools, a friend used one and the car refused to start afterwards. It had to be tailored to he main dealer to have the ECU reset.
|
Think I'll stick to the paperclip method...
|
Quote:
I will be getting in contact with them . My concern is that someone else may use one and do more damage. |
Quote:
To be honest that's why I brought one as I had seen that other rover 75 owners had used one and all was well. |
All times are GMT. The time now is 09:41. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd