Have you ever seen anything like this ABS?
3 Attachment(s)
Just goes to show what a little water will do - or in this case a flooding!
So you can see now I definitely need a new ABS unit with Traction Control/Cruise for Petrol and a Plug. I am assuming only used ones are avaiolable so provided there is enough wire length to attach to my loom that will be fine; unless of course there are still new ones available! Anyone have such items? nice please! forgot to add the part number is 0265 900 003 although I am not sure if 004 will do the job |
Yep, i had the same with battery acid once, good luck soldering a new plug on, its very very time consuming!
What is the two letter code stamped on the ally block of the unit? |
Oops missed that or do you mean SRB 101301?
|
Wow, that certainly needs a bit of care and attention :(
I might be tempted to try get a non-traction unit to start with - more around to start with - and of there are other problems then you have spent less money trying to fix it... I can help you with the t4 coding if needed. I would imagine of you went to a scrap yard you could cut the end of the loom free with the abs unit..... Less easy on eBay.... |
trouble nowadays the scrappy either will not or cannot allow one to "roam" around!
Our only local one will certainly not ..... miserable......@$$@~ Thank you for your offer Chris I will certainly keep that in mind, although I was hoping to do a one time fix back to how it was/should be. (wishful thinking?) |
Andy if that SRB number is not the one you mean I will go back to the workshop, probably tomorrow now and look for it
|
You can still get the plug new from Rimmers. http://www.rimmerbros.co.uk/Item--i-YMQ104730
Regards John |
Thanks John, I have asked the question, to make sure, that it is the loom part needed. I just didn't think they were available!
....Oh! just realised I cannot ask the question ... but it does say ABS link so here goes... all I need is the ABS unit then. |
Repair Sheet
1 Attachment(s)
Here is the repair PDF from Rover. Tells you how to replace the connector.
Regards John |
Quote:
|
All times are GMT. The time now is 06:20. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd