The 75 and ZT Owners Club Forums

The 75 and ZT Owners Club Forums (https://www.the75andztclub.co.uk/forum/index.php)
-   Technical Help Forum (https://www.the75andztclub.co.uk/forum/forumdisplay.php?f=11)
-   -   zcs codes (https://www.the75andztclub.co.uk/forum/showthread.php?t=319737)

xsport 22nd June 2022 21:29

zcs codes
 
i have kv6 3 speed fan /4 wire fitted. if i were to fit jules revotec fan myself, does the control box need altering in any way ? and secondly , will i need a session on T4 for zcs codes . would EP faults appear on my IPK without a session on T4 .. i have renewed brushes on mine before but im thinking of changing it over next time. many thanks.

BigRuss 22nd June 2022 21:37

The Revotec fan utilises the standard control box. If you get it from Jules it comes with full fitting and wiring instructions for both 3 and 2 speed control boxes IIRC ;)

You don't need to change any ZCS coding with regards the fan ;)

If you speak to Jules he'll sort you out ;)

Russ

Tracker 23rd June 2022 22:32

Agreed - Jules can sort it. I sent him the control box and he sent it back with the new Revotec fan all wired ready to plug and play. Been in for three years now with no trouble at all.

SD1too 24th June 2022 09:32

Quote:

Originally Posted by xsport (Post 2936588)
... i have renewed brushes on mine before but im thinking of changing it over next time.

Hi Stefan,

If you used Engineering Carbon Products' brushes on your 3 speed motor then you'll have to wait a very long time before the "next time"! :D (I renewed mine 57,000 miles ago and still going strong).

Personally, I prefer the 3 speed motor. It's quieter than the 2 speed and three stages of cooling is a better engineering solution in my opinion. The giant MGR fan blades also look more convincing to me than the razor clam blades on the Revotec.

Good luck with whatever you decide.

Simon

xsport 24th June 2022 19:51

thankyou simon. Yes i did buy the carbon products versions. renewed all 4 , even though the slow speed earth was the only significant one in need of replacing. im not an aircon "must have on " driver , and so my demands for usage are by and large driven by cooling requirements. i have however made a note of the company details for future needs. Good to know that the long lifespan is as high as you suggest, so maybe i will stick with the " if it aint broke " opinion for now.. ;)


All times are GMT. The time now is 11:53.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd