Retro fit v6 cruise control frustration
 

Dear All
I've just fitted cruises control on my 190+ v6. The master switch lights up but the cruise will not engage when the steering wheel controls are used. I have changed the brake pedal switch for a new one from Rimmer Bros and have a clutch pedal switch. All of the wiring was already in place. any help would be greatly appreciated.

Did you fit the vacuum pump, and the throttle body actuator Marcus, just you don't mention them?

Brian :D

If you don't get it sorted easily, you can pop over when the restrictions are lifted and ill have a look for you.

Have fitted Vacuum pump and actuator

Thanks Trikey

Try lifting the brake & clutch pedals in turn with your foot when engaging the cruise control system-simple things first!

Have already tried that thanks

Could be somthing else but i vaguely remember somthing about a certain type of horn being required to be fitted for it to work. The plug for it was near the ecu area i think.

That's when you add Powerwash

ah, thats right, i remember now, i put a zt front on one of my 75s and was trying to fit the extra washers for the headlights.
Between brian and trikey, they will know exactly what is required to make cruise control work!!