Sill repair - Ipswich
 

Hi all.

One of my sills has gone (OSR)
Any recommendations around the Ipswich area for repair work?https://uploads.tapatalk-cdn.com/202...0a15d22d6e.jpg


Sent from my iPhone using Tapatalk

Tom Hobbs is the Man, don’t bother trying to find anyone better locally!!

I can recommend a local small garage that cut out the old front/rear sill sections and formed/welded in new sections on my Omega. The chap came highly recommended by my trusted local independent. They use him for all their welding work. I am still pleased with the quality of the work.

It is LDO Vehicle Services, Forward Green, IP14 5EN. Tel: 07595223814. The chap's name is Liam and his premises are about 3 miles from the A14/A140 junction.

Also, if you need a good, trustworthy, local garage, I would recommend my trusted local independent - Old Forge Garage on the A140, about 2 miles from the A14/A140 junction. The mechanic's name is Jamie Green. I've been going here for nearly 25 years, although Jamie has only been there a few years.

Tom Hobbs is your man as Trikey said. He does sell pre fab spot on sill replacements on e-bay if you have a local welder who can fit them.

https://www.ebay.co.uk/sch/i.html?_f...sills&_sacat=0

Cheers for the feedback all, where’s Tom Hobbs based?


Sent from my iPhone using Tapatalk

Off the M1 North of Nottingham :shrug:

http://www.tjhobbs.com/


https://www.the75andztclub.co.uk/for...06#post2872006

Ohhhh, little bit further than Ipswich 😆
I’ll put him in the consideration list


Sent from my iPhone using Tapatalk

A local welder can do the sill oK - but its the construction of the jacking point under the C pillar that most cannot/will not do - hence our promotion of Tom Hobbs. :shrug:

Cheers. I think I’ve found a company nearby that can help. He asked straight away if it was a monogram (regarding paint cost) so that gave me confidence they have some experience of ZT\75’s


Sent from my iPhone using Tapatalk