Unable to open passenger door from inside
 

Hi. I can’t seem to open my front passenger side door from inside the car but opens fine on the outside (Rover 75 mk2 1.8 turbo). What would be the issue? Thanks.


Sent from my iPhone using Tapatalk

Remove the internal handle and see if the Chinese metal hook as broken, if so replace or repair.

You can use some wire & a choc block also.

Normally if the internal handle hook is broken you’ll get a floppy Handle as it has no resistance
Mick

Hi Mick.
You are correct there ;) so it is most likely the white clip on the thread its stripped the plastic thread, or needs adjusting, once adjusted put a cable tie round the clip.
https://i.imgur.com/h9KUCQJl.jpg1

https://i.imgur.com/pain6WVl.jpg2

PS Mick a PM coming your way ;)

Yeah I think cable ties are the best way to go, I often put two around it, however once I noticed when stripping a car down that somebody had used a Velcro strap on it, I guess that’s a different approach and it also appeared to work.
Mick