Which diagnostic lead?
 

I'd like to buy a diagnostic lead to plug into my ZT T 2002 KV6 .
The socket in the car looks to be a 8pin single row but nearly all the ones on that well-known auction site seem to be double row 16 pins.
Could anyone advise me what type/designation of cable I should be looking for please?


thanks,
Malc

https://i.stack.imgur.com/R891J.jpg
Your socket looks like this

The diagnostics socket is under the edge of the dash near the driver's right knee. It's a double row, 8 - 8, as shown above.

Are you planning to use TOAF? If so there are lots of suitable OBD to USB adapter cables on eBay. The ones people usually buy are the VAG-COM type and requires you to solder a bridge across pins 7 and 8. These's a lot of info on this and TOAF if you do a simple word search

TC

Thanks very much for all the info. All the cables I could see on Ebay were USB male to OBD2 female and now I see I need USB male to OBD male!
So now I've ordered a cable and I know which are pins 7 and 8.
Thanks again,
Malc