rover 75 cdti clutch torque settings
hi to all
can anyone tell me what the torque settings should be for the pressure plate bolts in the haynes manual it says 115nm but that seams excessive to me for such a small bolt the flywheel bolts are much bigger and the torque is 110 nm david |
Not sure what you are looking at in Haynes but page 6*1 in mine says 25 Nm for the pressure plate retaining bolts.
|
Yep RAVE says the same Jon. Torqued mine up to 25Nm when I did the clutch a few weeks ago and it hasn't fallen off yet. :}
|
All times are GMT. The time now is 06:26. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd