The 75 and ZT Owners Club Forums

The 75 and ZT Owners Club Forums (https://www.the75andztclub.co.uk/forum/index.php)
-   The 75 and ZT Owners Club General Forum (https://www.the75andztclub.co.uk/forum/forumdisplay.php?f=9)
-   -   What I did with my Rover 75/MG ZT today? (https://www.the75andztclub.co.uk/forum/showthread.php?t=172123)

jonathan63 10th November 2016 17:08

Quote:

Originally Posted by roverbarmy (Post 2396124)
Changed one of my 2 year old Tesco wiper blades for another one. £4
Tight NAUGHTY WORD-NAUGHTY WORD-NAUGHTY WORD-!
:D

Are these not a bit clattery when in use? I bought some for 99p and they are as noisy a hell.:o I might push the boat out if your Tesco ones are ok. :}

roverbarmy 10th November 2016 17:16

Quote:

Originally Posted by jonathan63 (Post 2396420)
Are these not a bit clattery when in use? I bought some for 99p and they are as noisy a hell.:o I might push the boat out if your Tesco ones are ok. :}

I haven't noticed them to be noisy.
Mike

jonathan63 10th November 2016 18:21

Collected 20 live chickens and a triple width Stag wardrobe, and still drove home in comfort. What fabulous cars these are.

KeithA 11th November 2016 16:35

Noticed my clutch is slipping under hard acceleration :mad:

Got some quotes - c. £600 in Essex using quality parts

Booked an MoT for next week, although it is not due until mid-Jan.

If the MoT is relatively clean it'll get a clutch.

If not ...... :shrug:

7T5 12th November 2016 09:49

I am taking mine home. Off to the NEC later today so going to take it to Longbridge and take some photos. Will be dark but will do the best i can with them.

FLYING BANANA 12th November 2016 10:48

Stuck another £45's worth of go-go juice in the Bear. Should get me to the Caldercotte Arms meet tomorrow.

FLYING BANANA 12th November 2016 10:50

Quote:

Originally Posted by Steve42 (Post 2396192)
Went to change my crowns wheels for my union wheels on my old v6 .
First wheel will not come off the car .
Even put a jack behind the wheel still will not move.
so what did I do with my car today .
I failed. That's what I did

A grenade works well, just stand back a bit after pulling the pin.:getmecoat:

EastPete 12th November 2016 10:50

Quote:

Originally Posted by KeithA (Post 2397092)
Noticed my clutch is slipping under hard acceleration :mad:

Got some quotes - c. £600 in Essex using quality parts

Booked an MoT for next week, although it is not due until mid-Jan.

If the MoT is relatively clean it'll get a clutch.

If not ...... :shrug:

Make sure they use LUK or Borg and Beck clutch kit with either genuine LUK or the all-metal slave cylinder - in fact, insist on it !! Anything else, and you could be wasting your money. If they won't use these parts, go elsewhere.

Pete

KeithA 12th November 2016 10:54

Quote:

Originally Posted by EastPete (Post 2397596)
Make sure they use LUK or Borg and Beck clutch kit with either genuine LUK or the all-metal slave cylinder - in fact, insist on it !! Anything else, and you could be wasting your money. If they won't use these parts, go elsewhere.

Pete

Cheers Pete, yes the local Mg/Rover specialist says he quotes for Luk clutch and slaves only.

Sent from my LG-D855 using Tapatalk

keithst24 12th November 2016 15:12

Took ''Lucky'' my Tourer for a spin, very comfy indeed.....then I decided to treat her to a new head unit, So I have ordered a double din Navall Star from Radioguy :D cant wait to fit it :drool4:


All times are GMT. The time now is 12:32.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd