The 75 and ZT Owners Club Forums

The 75 and ZT Owners Club Forums (https://www.the75andztclub.co.uk/forum/index.php)
-   Technical Help Forum (https://www.the75andztclub.co.uk/forum/forumdisplay.php?f=11)
-   -   Bork and Beck 2 part clutch (https://www.the75andztclub.co.uk/forum/showthread.php?t=283657)

STUBIE 21st May 2018 11:24

Bork and Beck 2 part clutch
 
I ordered one of these the other day and it came in a generic brown box.
Would these normally be packaged in retail boxes rather than the current which said made in Tiawan.

Want to make sure I'm getting a genuine part.

Stubs

wullie480 21st May 2018 11:27

Quote:

Originally Posted by STUBIE (Post 2631886)
I order one of these and it came in a generic brown box. Would these normally come in retail boxes?

Stubs

I'd expect it to come in retail packaging :shrug:

Any manufacturers name on the parts themselves?

STUBIE 21st May 2018 11:34

Quote:

Originally Posted by wullie480 (Post 2631887)
I'd expect it to come in retail packaging :shrug:

Any manufacturers name on the parts themselves?

Had a quick look and there is on the reverse of the clutch, interstingly its the only bit of sealing packing that has been broken, as it someone wanted to put stamp there.

Sheraton 21st May 2018 11:52

I'd certainly expect Borg and Beck parts to be supplied in a branded package - when i purchased Brake Discs/Pads they were packaged in a blue box with the red/blue logo :shrug:

who was the supplier ? - i'm guessing ebay.



Paul.

marinabrian 21st May 2018 16:15

It depends really, I've had them in plain boxes where the original cardboard sleeve over the box has been removed.

The maker will be stamped onto the pressure plate, and printed onto the friction material.

What slave are you intending to use?

Something cheap and cheerful HERE

Brian :D

EastPete 21st May 2018 18:03

Quote:

Originally Posted by STUBIE (Post 2631886)
I ordered one of these the other day and it came in a generic brown box.
Would these normally be packaged in retail boxes rather than the current which said made in Tiawan.

Want to make sure I'm getting a genuine part.

Stubs

Stuart

In a genuine B&B kit, the pressure/cover plate should have Borg and Beck stamped on it somewhere, and the centre plate actually has LUK stamped on it. It should also come with a small sachet of spline grease to put on the input shaft splines/release bearing face.

There were some fake/Chinese copy B&B kits circulating a couple of years back.

Are you fitting this yourself ? Give us a shout if you need any help - I am just down the road.

Pete

STUBIE 21st May 2018 19:38

Quote:

Originally Posted by marinabrian (Post 2631976)
It depends really, I've had them in plain boxes where the original cardboard sleeve over the box has been removed.

The maker will be stamped onto the pressure plate, and printed onto the friction material.

What slave are you intending to use?

Something cheap and cheerful HERE

Brian :D

Was going to use this one Brian, as I see you recommend LUK slaves. Seems to be a good price.

https://www.ebay.co.uk/itm/Rover-75-...53.m1438.l2649

STUBIE 21st May 2018 19:39

Quote:

Originally Posted by EastPete (Post 2632020)
Stuart

In a genuine B&B kit, the pressure/cover plate should have Borg and Beck stamped on it somewhere, and the centre plate actually has LUK stamped on it. It should also come with a small sachet of spline grease to put on the input shaft splines/release bearing face.

There were some fake/Chinese copy B&B kits circulating a couple of years back.

Are you fitting this yourself ? Give us a shout if you need any help - I am just down the road.

Pete

I'm hoping to get it through to Lates and Pete in Rugby. Although it needs an MOT before then. Thanks for the offer.

You don't know anyone in the area that has a trailer for transport.

Stubs

EastPete 22nd May 2018 08:32

Quote:

Originally Posted by STUBIE (Post 2632077)

You don't know anyone in the area that has a trailer for transport.

Stubs

There are one or two folks around here with recovery trucks that do classic car transportation (try Robin Hunter at Wisbech www.car-transport-services.co.uk) alternatively FS trailers down in St. Ives /Huntingdon hire out trailers.

Pete

Snetty 22nd May 2018 17:41

There is also a place in Wisbech that hires trailers at a competitive price thou the name escapes me.


All times are GMT. The time now is 21:31.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd