Powerfold mirror motor test?
I have a set of powerfold mirrors that i am considering fitting to my car, but before i go ripping the doors apart, am i able to test that the motors actually work in the mirrors before fitting, as they havent been used for some time? My car doesnt have the required wiring/switch for powerfolds but I have these off a donor car. Thanks for reading.
|
I've installed a set of skull powerfold mirrors last week. As I could not fit the loom ( my car is LHD and the loom was RHD) I removed the orange wires with the plugs from the loom and installed in the door loom of my 75. I started with the driver side as it's easy to install and get a test to see if is actually working once you have the new switch cluster with power fold mirrors button.
You can see in this video. Btw I did not remove the doors in order to fully installed the wires. |
Wire the motors across the battery from the two powerfold connections on the mirror. connected one way will open the mirror, reversing the polarity will close it.
|
All times are GMT. The time now is 14:31. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd