The 75 and ZT Owners Club Forums

The 75 and ZT Owners Club Forums (https://www.the75andztclub.co.uk/forum/index.php)
-   The 75 and ZT Owners Club General Forum (https://www.the75andztclub.co.uk/forum/forumdisplay.php?f=9)
-   -   sill trim (https://www.the75andztclub.co.uk/forum/showthread.php?t=300168)

grs6680 21st October 2019 20:45

sill trim
 
how to remove without breaking all the clips.

Sent from my SM-G935F using Tapatalk

ardvark 22nd October 2019 05:54

Either lift up and tilt forward or push down and tilt back. Can't remember which.

gozo ken 22nd October 2019 07:46

Maybe warm it slightly with a hair dryer,so the plastic clips aren't so brittle, before trying to remove it.
Ken.

squire 22nd October 2019 08:55

I'd like to know an easy, clip friendly way too, if there is one:shrug: ;)

ceedy 22nd October 2019 09:02

Pull up with a strip of cloth/plastic strapping and then out to unclip at the top, but being older plastic they still tend to break if not super careful .


Start at an end and work your way along carefully .


https://i.imgur.com/qlQSrOr.jpg



https://i.imgur.com/8PvTSXb.jpg



If you don't intend to do it again, you can glue the broken clips in the trim with gorilla glue/ tiger glue , inline with the slotted holes and pop it on .


All times are GMT. The time now is 02:04.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd