The 75 and ZT Owners Club Forums
Page 1 of 4 1 23 Last »
Show 150 post(s) from this thread on one page

The 75 and ZT Owners Club Forums (https://www.the75andztclub.co.uk/forum/index.php)
-   I.C.E. Forum (https://www.the75andztclub.co.uk/forum/forumdisplay.php?f=27)
-   -   Rattling Door Cards (https://www.the75andztclub.co.uk/forum/showthread.php?t=180803)

Simon.h 19th April 2014 05:59
Rattling Door Cards
 
Hi all,
I have a D.Din WinCE head unit which is connected to a Vibe Slick A1 amp (4 x75 watts RMS) which powers Focal Access 156AS in the front doors and Kenwood KFC-P602 in the rear doors, the system sounds great but I'm having problems with the front door cards rattling.

Any ideas on how to stop it?

Thanks

kc13661 19th April 2014 06:09
Not an expert but it sounds like when the cards were removed to fit new speakers, they have not been refitted properly. Try taking them off and fitting them again, check all clips and fixings are in good condition and replace as necessary

Mikeal1 19th April 2014 06:52
The 2 black clips in the middle need to attach to the card, then fitted to the door.
I did it the other way round and it rattled for ages.
Fitted them the right way last week, no problems so far!

Simon.h 19th April 2014 07:08
Black clips fixed to card before fitting and new clips where needed.
Over the last 5 years and owning 5 ZTs I can remove/refit these cards with my eyes shut.
Thanks anyway.

Any other ideas?

MangoMan 19th April 2014 07:15
You most probable need to install something like this to the interior of the Doors....

http://www.ebay.co.uk/itm/Vibe-Audio...p2054897.l4275

trebor 19th April 2014 07:18
First of all what is actually rattling, because a common issue once the door cards are removed is the lock button vibrating, as it fed through the hole in the door card on refitting it must move it somehow. It can be cured by sticking one of those felt pad thingies on the inside of the door card next to the lock button.

Do you have the proper fir tree clip in the top of the door card near to the lock button, it is different to the ones on the bottom of the card and it can cause a rattle if replaced with the wrong type

Simon.h 19th April 2014 07:51
Quote:
Originally Posted by MangoMan (Post 1645747)
You most probable need to install something like this to the interior of the Doors....

http://www.ebay.co.uk/itm/Vibe-Audio...p2054897.l4275
I think your right but its not cheap.

Simon.h 19th April 2014 07:56
Quote:
Originally Posted by trebor (Post 1645752)
First of all what is actually rattling, because a common issue once the door cards are removed is the lock button vibrating, as it fed through the hole in the door card on refitting it must move it somehow. It can be cured by sticking one of those felt pad thingies on the inside of the door card next to the lock button.

Do you have the proper fir tree clip in the top of the door card near to the lock button, it is different to the ones on the bottom of the card and it can cause a rattle if replaced with the wrong type
Its the whole door card!
The Focal speakers are great and do have good bass, if I have the door open and push the card with both hands then this stops the rattle a bit.
I can't have a half full bottle of water in the door as this rattles as well.

MrDoodles 19th April 2014 09:39
Quote:
Originally Posted by Simon.h (Post 1645741)
Any other ideas?
Turn the bass down? :shrug: ;) :D

MangoMan 19th April 2014 09:57
Quote:
Originally Posted by Simon.h (Post 1645776)
I think your right but its not cheap.

What is these days...... :o Sorry.


All times are GMT. The time now is 08:32.
Page 1 of 4 1 23 Last »
Show 150 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd