Rover 75 reverse sensors
Yesterday I reversed into a post!! The reverse sensors now do not work at all. They worked perfectly before. When I put the car in reverse I do not get the loud beep. I've checked the revering lights which work. I've tried listening for each individual sensor to see if I can hear them clicking when the car is in reverse. None of them do. Any suggestions?
Thanks, Simon |
As all 4 sensors are now not working check out the connector which draws the 4 individual sensor looms together before continuing to the parking ECU as one connection - your impact may have loosened the wiring in the connector.. Doubt your parking ECU is at fault.:shrug:
|
Quote:
are you sure you want to admit the parking/reversing sensors were working before you hit the post? :) macafee2 |
good point :}
|
I would check the harness behind the bumper, probably gone South when it got bumped (they are fragile due to age these days)
|
Thanks. I'll take the bumper off and check the wiring.
|
All times are GMT. The time now is 09:07. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd