The 75 and ZT Owners Club Forums

The 75 and ZT Owners Club Forums (https://www.the75andztclub.co.uk/forum/index.php)
-   V8 Forum (https://www.the75andztclub.co.uk/forum/forumdisplay.php?f=21)
-   -   260 rear brake discs / pads (https://www.the75andztclub.co.uk/forum/showthread.php?t=221189)

2750 HP 15th July 2015 14:44

260 rear brake discs / pads
 
Hi: can anyone advise where to get or have a set to sell of 260 rear brake discs. If so please pm me.

Regards
Steve

AndyG 15th July 2015 15:16

Quote:

Originally Posted by 2750 HP (Post 2046756)
Hi: can anyone advise where to get or have a set to sell of 260 rear brake discs. If so please pm me.
Regards
Steve

The 260s have them :}

colintf 15th July 2015 15:29

Quote:

Originally Posted by AndyG (Post 2046772)
The 260s have them :}

The Two-Sixties group get the rear discs made and are a lot cheaper than elsewhere (if you can find them elsewhere) :}

2750 HP 15th July 2015 16:32

Posted this afternoon on 260 site and await a response. Discs may take a skim - any idea as to diameter and where I could get pads?

Thanks
Steve

Ken B 15th July 2015 18:22

Are you a member of the twosixties, if so you can obtain drawings of the rear discs from the index section. Discs and pads are available from the club shop. You may well need to replace the handbrake shoes as well i got these from eurocarparts think they are peugeot shoes.. Discs are 332 diameter and 26mm thick...
Ken...

AndyG 15th July 2015 19:44

Quote:

Originally Posted by 2750 HP (Post 2046829)
Posted this afternoon on 260 site and await a response. ........ Steve


I don't see the post. do you have a link? :shrug:

2750 HP 15th July 2015 19:51

Hi: found some drawings as to dimensions but unsure as to minimum width acceptable after skimming. Can anyone advise please.

Steve

Ken B 15th July 2015 20:25

Only info i could find on the twosixties is 24mm. So thats 1mm off each side...

AndyG 15th July 2015 21:16

Quote:

Originally Posted by 2750 HP (Post 2046947)
Hi: found some drawings as to dimensions but unsure as to minimum width acceptable after skimming. Can anyone advise please.
Steve

A disc (26mm) can be skimmed down to minimum 24mm.

2750 HP 17th July 2015 22:23

Thanks for your help. Found a garage in Stoke who can skim them. Hopefully there is enough meat on them and with new pads this will be sufficient for a few years.

Car by the way has 35,000 miles on the clock.

Regards
Steve


All times are GMT. The time now is 04:34.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd