splash screen
hello to all
I am trying to change the splash screen on my mk4 dvd unit I have the bmw software update V32.2 disk and update system V32 custom disk I have used navtweak and mode2cdmake and burned the files as mode2 form1 but it does not work what format should this software be burned to disk david |
Quote:
From what I recall when I upgraded mine several years ago, in you want to install a new copy of the firmware over the installed (i.e. v32 over v32) you've got to change a 'bit' in the installation firmware to indicate to the drive that it is a higher firmware version. I do have my notes etc. somewhere from when I made a custom splash screen for mine, I could dig them out and have a look if you wanted, but from memory you need 'ultraiso' to extract the navboot file from the image, 'navtweak' to modify the navboot file and them 'imageburn' to write the modified firmware image to a CD-ROM Steve |
Quote:
|
hi to all
if you want to change the splash screen you have to use navtweak there are full instructions on this forum and you need v32 and v32.2 you use v32 to go back then use v32.2 with your new splash screen this will then update your system but there is a difference between mk3 and mk4 the mk3 disks need to be mode2/form1 mk4 need to be mode1/2048 format david |
You need to downgrade to an older version, then upgrade using the modified disk. If you’re having issues I can send you a link to download the disk I made.
|
All times are GMT. The time now is 02:58. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd