The 75 and ZT Owners Club Forums

The 75 and ZT Owners Club Forums (https://www.the75andztclub.co.uk/forum/index.php)
-   The 75 and ZT Owners Club General Forum (https://www.the75andztclub.co.uk/forum/forumdisplay.php?f=9)
-   -   As I'm going to the breakers (https://www.the75andztclub.co.uk/forum/showthread.php?t=287016)

macafee2 13th August 2018 20:40

As I'm going to the breakers
 
As I'm going to the breakers tomorrow I thought I'd ask if anyone wants anything.
if you do, pm me before 7.30 am 14.08.18 what you want and how much you want to pay. please bear in mind if I need to post it to you there is postage as well.
please also give a clear description of what it is unless its going to be obvious. tank strap for a diesel saloon, obvious, the nut that holds the thingy to engine, not obvious:D

sub frames, gear boxes are a no no :)


you will pay what I pay, so if it is below your maximum your in luck but I wont go over your budget. I'll never get rich

i'll only have a couple of hours

macafee2

STUBIE 13th August 2018 21:01

I desperately need the cover part end of a drivers door barrel.

Its the bit of metal on the end in this picture

https://rimmerbros.com/Item--i-CWC102350

Darcydog 13th August 2018 21:13

Kind offer Ian - but I have more parts in the garage ready to fit than I should admit to😃. From ppd door reflectors to air con condenser and cruise control.

Out of interest which one are you going to?

macafee2 14th August 2018 05:53

Quote:

Originally Posted by Darcydog (Post 2659755)
Kind offer Ian - but I have more parts in the garage ready to fit than I should admit to��. From ppd door reflectors to air con condenser and cruise control.

Out of interest which one are you going to?

silverlake


macafee2

macafee2 14th August 2018 05:55

Jackstevens98 you pm box is full so cant reply but no not now hopefully :D. Just on the hunt for spares to keep for the future, for example the spring clips that hold the gear cables in place. They are no longer available and I have had two snap when removed.
Tourer rear screens apparently no loner available.

I quite like going around a scrap yard to see what's there.
If I had more time to spend there today and a bigger vehicle goodness knows what I would come home with


macafee2

macafee2 14th August 2018 05:57

Quote:

Originally Posted by STUBIE (Post 2659753)
I desperately need the cover part end of a drivers door barrel.

Its the bit of metal on the end in this picture

https://rimmerbros.com/Item--i-CWC102350


which part? on the left hand end looks to be a part that is a push fit with a rectangle hole in it, is this the part?

macafee2

macafee2 14th August 2018 05:59

Quote:

Originally Posted by Darcydog (Post 2659755)
Kind offer Ian - but I have more parts in the garage ready to fit than I should admit to��. From ppd door reflectors to air con condenser and cruise control.

Out of interest which one are you going to?

Do you remember the 1.8 on my drive? I have to find a place for the doors, bonnet and boot as it's going for scrap once stripped

macafee2

STUBIE 14th August 2018 06:51

Quote:

Originally Posted by macafee2 (Post 2659798)
which part? on the left hand end looks to be a part that is a push fit with a rectangle hole in it, is this the part?

macafee2

Yes that's the bit

wullie480 14th August 2018 09:05

Quote:

Originally Posted by STUBIE (Post 2659811)
Yes that's the bit



I thought you were sorted with this.

I’ve one from my old at if your not sorted after the ops visit to the breakers. https://uploads.tapatalk-cdn.com/201...0a43d1557c.jpg


Sent from my iPhone using Tapatalk

macafee2 14th August 2018 10:00

Quote:

Originally Posted by STUBIE (Post 2659753)
I desperately need the cover part end of a drivers door barrel.

Its the bit of metal on the end in this picture

https://rimmerbros.com/Item--i-CWC102350

I think I have this bit will post a picture later.

was not a good trip really

macafee2


All times are GMT. The time now is 17:51.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd