Starter motor upper mounting bolt?
I've been trying for the past 2 hours to see, find, smell, touch and maybe one day - extract the starter motor upper mounting bolt. (diesel). Yes I have Arctic's otherwise impeccable How To (https://www.the75andztclub.co.uk/for...d.php?t=227316) but even he has obviously had trouble photographing it. Is there a better pic anywhere in the universe please?
PS A maybe obvious tip but I couldn't shift the lower mounting bolt till I tied the 15mm ring spanner with a piece of cord, in case it slipped off and dropped into the undertray - and with no means of crawling underneath as it's not on ramps - I then wedged a long bit of wood against the spanner and hit it with a mallet. That did the trick. |
Hi Dave.
You may have to move the wiring conduit away a little before you can get the 13mm deep socket onto the bolt head, it also carries the earth strap, you can also follow that to find it ;) https://i.imgur.com/eui8l50h.jpg1 https://i.imgur.com/nN0wlvlh.jpg2 https://i.imgur.com/7Gzzt3ah.jpg3 |
Quote:
Do you have an auto? If so then you won't be able to see the bolt. Use a short extension, slide it in place by feel, undo the bolt and leave it and the socket and extension where it is, then tighten it once the starter motor is back on. Simples......with a bit of luck! :getmecoat: |
1 Attachment(s)
Quote:
https://www.the75andztclub.co.uk/for...1&d=1562271442 |
All times are GMT. The time now is 01:49. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd