Kenwood IR steering controls - Help needed
 

I need sone help re-connecting the Kenwood IR steering wheel control box on a 2002 ZT with a Kenwood KRC-391 head unit.

The box has 3 wires coming out of it (Excluding the IR sensor), Green/White, Blue/Purple & Black.

I have identified the 2 wires from the car loom going into the BMW connector block for the steering wheel controls, Blue/Orange & Blue/Purple.

I need to know how to re-connect the 3 Kenwood wires back into the car loom if anyone can help?

Thanks.

Green/White is 12v ignition feed, connect Blue/Purple to Blue/Purple, Blue/Orange to Black

Kenwood IR
 

Thanks Raykay,

Think my IR box must be knackered, as the unit is not responding to the steering controls. :(

Mik

Make sure the head unit can 'see' the LED, a common thing for it to be out of alignment.

IR controls
 

Yep, had the LED right in front of the head unit to test!

Never mind, cheers anyway

I have a fully working IR unit (black box) complete with wires and the IR. PM me if you want to buy it off me... i'm looking about £15 + P&P