high revving
not long ago i had a clutch fitted to which the engine had to come out the job was done and on completion after driving it home i found that the engine was revving at around 1200 revs how can i get it rev at the recommended rev rate
help needed as i believe i am using more fuel because of this |
more car details petrol 1.8 2.0 2.5 or diesel
|
Profile says 2003 1.8.
Chips |
could be an air leak on the inlet or a breather has been disturbed
|
Thread moved to the Technical help Forum,redirect left.
|
it could be the idle valve is faulty or they have not adjusted the throttle cable properly.give it a turn or 2 see it that does anything .
|
plenty of play on the cable
|
If it is a 1.8 switch ignition on to poss 2 and push throttle pedal fully down and up 5 times within 10seconds and start
|
Quote:
|
throttle working perfectly
|
All times are GMT. The time now is 13:41. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd